**Experimental Probability**FreeExperimental probability is the probability that a certain outcome will occur based on an experiment being performed multiple times. Probability word problems worksheets. Read more...iWorksheets: 3Study Guides: 1**Theoretical probability and counting**Probability word problems worksheets. Theoretical probability is the probability that a certain outcome will occur based on all the possible outcomes. Sometimes, the number of ways that an event can happen depends on the order. A permutation is an arrangement of objects in which order matters. A combination is a set of objects in which order does not matter. Probability is also based on whether events are dependent or independent of each other. Read more...iWorksheets: 3Study Guides: 1**Applications of percent**Percent increase or decrease can be found by using the formula: percent of change = actual change/original amount. The change is either an increase, if the amounts went up or a decrease if the amounts went down. If a number changes from 33 to 89, the percent of increase would be: Percent of increase = (89 -33) ÷ 33 = 56 ÷ 33 ≈ 1.6969 ≈ 170% Read more...iWorksheets: 4Study Guides: 1**Numbers and percents**Numbers and percents refer to the relationship between fractions, decimals, and percents. A percent is a term that describes a decimal in terms of one hundred. Percent means per hundred. Percents, fractions and decimals all can equal each other, as in the case of 10%, 0.1 and 1/10. Fractions and decimals can easily be changed into percent. There are three cases of percent. Read more...iWorksheets: 3Study Guides: 1### MS.MP. Standards for Mathematical Practice

#### MP.1. Make sense of problems and persevere in solving them.

**Mathematical processes**Mathematical processes refer to the skills and strategies needed in order to solve mathematical problems. If one strategy does not help to find the solution to a problem, using another strategy may help to solve it. Problem solving skills refer to the math techniques that must be used to solve a problem. If a problem were to determine the perimeter of a square, a needed skill would be the knowledge of what perimeter means and the ability to add the numbers. Read more...iWorksheets :3Study Guides :1#### MP.2. Reason abstractly and quantitatively.

**Mathematical processes**Mathematical processes refer to the skills and strategies needed in order to solve mathematical problems. If one strategy does not help to find the solution to a problem, using another strategy may help to solve it. Problem solving skills refer to the math techniques that must be used to solve a problem. If a problem were to determine the perimeter of a square, a needed skill would be the knowledge of what perimeter means and the ability to add the numbers. Read more...iWorksheets :3Study Guides :1### MS.8. Grade 8

#### 8.NS. The Number System (NS)

##### Know that there are numbers that are not rational, and approximate them by rational numbers

###### 8.NS.1. Know that numbers that are not rational are called irrational. Understand informally that every number has a decimal expansion; for rational numbers show that the decimal expansion repeats eventually, and convert a decimal expansion which repeats eventually into a rational number.

**Rational and Irrational Numbers**A rational number is a number that can be made into a fraction. Decimals that repeat or terminate are rational because they can be changed into fractions. An irrational number is a number that cannot be made into a fraction. Decimals that do not repeat or end are irrational numbers. Pi is an irrational number. Read more...iWorksheets :3Study Guides :1#### 8.EE. Expressions and Equations (EE)

##### Work with radicals and integer exponents

###### 8.EE.1. Know and apply the properties of integer exponents to generate equivalent numerical expressions. For example, 3^2 × 3^(–5) = 3^(–3) = (1/3)^3 = 1/27.

**Exponents, Factors and Fractions**FreeIn a mathematical expression where the same number is multiplied many times, it is often useful to write the number as a base with an exponent. Exponents are also used to evaluate numbers. Any number to a zero exponent is 1 and any number to a negative exponent is a number less than 1. Exponents are used in scientific notation to make very large or very small numbers easier to write. Read more...iWorksheets :8Study Guides :1**Polynomials and Exponents**FreeA polynomial is an expression which is in the form of ax<sup>n</sup>, where a is any real number and n is a whole number. If a polynomial has only one term, it is called a monomial. If it has two terms, it is a binomial and if it has three terms, it is a trinomial. The standard form of a polynomial is when the powers of the variables are decreasing from left to right. Read more...iWorksheets :6Study Guides :1###### 8.EE.2. Use square root and cube root symbols to represent solutions to equations of the form x^2 = p and x^3 = p, where p is a positive rational number. Evaluate square roots of small perfect squares and cube roots of small perfect cubes. Know that √2 is irrational.

**Rational and Irrational Numbers**A rational number is a number that can be made into a fraction. Decimals that repeat or terminate are rational because they can be changed into fractions. An irrational number is a number that cannot be made into a fraction. Decimals that do not repeat or end are irrational numbers. Pi is an irrational number. Read more...iWorksheets :3Study Guides :1**The Pythagorean Theorem**Pythagorean Theorem is a fundamental relation in Euclidean geometry. It states the sum of the squares of the legs of a right triangle equals the square of the length
of the hypotenuse. Determine the distance between two points using the Pythagorean Theorem. Read more...iWorksheets :10Study Guides :2**Real numbers**Real numbers are the set of rational and irrational numbers. The set of rational numbers includes integers, whole numbers, and natural numbers. A rational number is a number that can be made into a fraction. Decimals that repeat or terminate are rational because they can be changed into fractions. An irrational number is a number that cannot be made into a fraction. Decimals that do not repeat or end are irrational numbers. Read more...iWorksheets :4Study Guides :1###### 8.EE.3. Use numbers expressed in the form of a single digit times an integer power of 10 to estimate very large or very small quantities, and to express how many times as much one is than the other. For example, estimate the population of the United States as 3 × 10^8 and the population of the world as 7 × 10^9, and determine that the world population is more than 20 times larger.

**Exponents, Factors and Fractions**FreeIn a mathematical expression where the same number is multiplied many times, it is often useful to write the number as a base with an exponent. Exponents are also used to evaluate numbers. Any number to a zero exponent is 1 and any number to a negative exponent is a number less than 1. Exponents are used in scientific notation to make very large or very small numbers easier to write. Read more...iWorksheets :8Study Guides :1**Polynomials and Exponents**FreeA polynomial is an expression which is in the form of ax<sup>n</sup>, where a is any real number and n is a whole number. If a polynomial has only one term, it is called a monomial. If it has two terms, it is a binomial and if it has three terms, it is a trinomial. The standard form of a polynomial is when the powers of the variables are decreasing from left to right. Read more...iWorksheets :6Study Guides :1###### 8.EE.4. Perform operations with numbers expressed in scientific notation, including problems where both decimal and scientific notation are used. Use scientific notation and choose units of appropriate size for measurements of very large or very small quantities (e.g., use millimeters per year for seafloor spreading). Interpret scientific notation that has been generated by technology.

**Exponents, Factors and Fractions**FreeIn a mathematical expression where the same number is multiplied many times, it is often useful to write the number as a base with an exponent. Exponents are also used to evaluate numbers. Any number to a zero exponent is 1 and any number to a negative exponent is a number less than 1. Exponents are used in scientific notation to make very large or very small numbers easier to write. Read more...iWorksheets :8Study Guides :1**Polynomials and Exponents**FreeA polynomial is an expression which is in the form of ax<sup>n</sup>, where a is any real number and n is a whole number. If a polynomial has only one term, it is called a monomial. If it has two terms, it is a binomial and if it has three terms, it is a trinomial. The standard form of a polynomial is when the powers of the variables are decreasing from left to right. Read more...iWorksheets :6Study Guides :1##### Understand the connections between proportional relationships, lines, and linear equations

###### 8.EE.5. Graph proportional relationships, interpreting the unit rate as the slope of the graph. Compare two different proportional relationships represented in different ways. For example, compare a distance-time graph to a distance-time equation to determine which of two moving objects has greater speed.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1###### 8.EE.6. Use similar triangles to explain why the slope m is the same between any two distinct points on a non-vertical line in the coordinate plane; derive the equation y = mx for a line through the origin and the equation y = mx + b for a line intercepting the vertical axis at b.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1##### Analyze and solve linear equations and pairs of simultaneous linear equations

###### 8.EE.7. Solve linear equations in one variable.

###### 8.EE.7.a. Give examples of linear equations in one variable with one solution, infinitely many solutions, or no solutions. Show which of these possibilities is the case by successively transforming the given equation into simpler forms, until an equivalent equation of the form x = a, a = a, or a = b results (where a and b are different numbers).

**Introduction to Algebra**Algebra is the practice of using expressions with letters or variables that represent numbers. Words can be changed into a mathematical expression by using the words, plus, exceeds, diminished, less, times, the product, divided, the quotient and many more. Algebra uses variables to represent a value that is not yet known. Read more...iWorksheets :4Study Guides :1**Equations and Inequalities**Algebraic equations are mathematical equations that contain a letter or variable, which represents a number. To solve an algebraic equation, inverse operations are used. The inverse operation of addition is subtraction and the inverse operation of subtraction is addition. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Read more...iWorksheets :6Study Guides :1**Using Integers**Integers are negative numbers, zero and positive numbers. To compare integers, a number line can be used. On a number line, negative integers are on the left side of zero with the larger a negative number, the farther to the left it is. Positive
integers are on the right side of zero on the number line. If a number is to the left of another number it is said to be less than that number. In the coordinate plane, the x-axis is a horizontal line with negative numbers, zero and positive numbers. Read more...iWorksheets :4Study Guides :1**Decimal Operations**Decimal operations refer to the mathematical operations that can be performed with decimals: addition, subtraction, multiplication and division. The process for adding, subtracting, multiplying and dividing decimals must be followed in order to achieve the correct answer. Read more...iWorksheets :3Study Guides :1**Fraction Operations**Fraction operations are the processes of adding, subtracting, multiplying and dividing fractions and mixed numbers. A mixed number is a fraction with a whole number. Adding fractions is common in many everyday events, such as making a recipe and measuring wood. In order to add and subtract fractions, the fractions must have the same denominator. Read more...iWorksheets :3Study Guides :1**Introduction to Percent**What Is Percent? A percent is a term that describes a decimal in terms of one hundred. Percent means per hundred. Percents, fractions and decimals all can equal each other, as in the case of 10%, 0.1 and 1/10. Percents can be greater than 100% or smaller than 1%. A markup from the cost of making an item to the actual sales price is usually greater than 100%. A salesperson's commission might be 1/2% depending on the item sold. Read more...iWorksheets :4Study Guides :1**Algebraic Equations**What are algebraic equations? Algebraic equations are mathematical quations that contain a letter or variable, which represents a number. When algebraic equations are written in words, the words must be changed into the appropriate numbers and variable in order to solve. Read more...iWorksheets :5Study Guides :1**Equations and inequalities**An equation is mathematical statement that shows that two expressions are equal to each other. The expressions used in an equation can contain variables or numbers. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Inequalities are also solved by using inverse operations. Read more...iWorksheets :3Study Guides :1**Integer operations**Integer operations are the mathematical operations that involve integers. Integers are negative numbers, zero and positive numbers. Adding and subtracting integers are useful in everyday life because there are many situations that involved negative numbers such as calculating sea level or temperatures. Equations with integers are solved using inverse operations. Addition and subtraction are inverse operations, and multiplication and division are inverse operations of each other. Read more...iWorksheets :4Study Guides :1**Rational numbers and operations**A rational number is a number that can be made into a fraction. Decimals that repeat or terminate are rational because they can be changed into fractions. A square root of a number is a number that when multiplied by itself will result in the original number. The square root of 4 is 2 because 2 · 2 = 4. Read more...iWorksheets :3Study Guides :1**Solving linear equations**When graphed, a linear equation is a straight line. Although the standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept, linear equations often have both of the variables on the same side of the equal sign. Linear equations can be solved for one variable when the other variable is given. Read more...iWorksheets :5Study Guides :1**Solving equations and inequalities**Algebraic equations are mathematical equations that contain a letter or variable which represents a number. To solve an algebraic equation, inverse operations are used. Algebraic inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to, ≥; less than, <; and less than or equal to, ≤. When multiplying or dividing by a negative number occurs, the inequality sign is reversed from the original inequality sign in order for the inequality to be correct. Read more...iWorksheets :3Study Guides :1###### 8.EE.7.b. Solve linear equations and inequalities with rational number coefficients, including those whose solutions require expanding expressions using the distributive property and collecting like terms.

**Introduction to Algebra**Algebra is the practice of using expressions with letters or variables that represent numbers. Words can be changed into a mathematical expression by using the words, plus, exceeds, diminished, less, times, the product, divided, the quotient and many more. Algebra uses variables to represent a value that is not yet known. Read more...iWorksheets :4Study Guides :1**Equations and Inequalities**Algebraic equations are mathematical equations that contain a letter or variable, which represents a number. To solve an algebraic equation, inverse operations are used. The inverse operation of addition is subtraction and the inverse operation of subtraction is addition. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Read more...iWorksheets :6Study Guides :1**Using Integers**Integers are negative numbers, zero and positive numbers. To compare integers, a number line can be used. On a number line, negative integers are on the left side of zero with the larger a negative number, the farther to the left it is. Positive
integers are on the right side of zero on the number line. If a number is to the left of another number it is said to be less than that number. In the coordinate plane, the x-axis is a horizontal line with negative numbers, zero and positive numbers. Read more...iWorksheets :4Study Guides :1**Decimal Operations**Decimal operations refer to the mathematical operations that can be performed with decimals: addition, subtraction, multiplication and division. The process for adding, subtracting, multiplying and dividing decimals must be followed in order to achieve the correct answer. Read more...iWorksheets :3Study Guides :1**Fraction Operations**Fraction operations are the processes of adding, subtracting, multiplying and dividing fractions and mixed numbers. A mixed number is a fraction with a whole number. Adding fractions is common in many everyday events, such as making a recipe and measuring wood. In order to add and subtract fractions, the fractions must have the same denominator. Read more...iWorksheets :3Study Guides :1**Introduction to Percent**What Is Percent? A percent is a term that describes a decimal in terms of one hundred. Percent means per hundred. Percents, fractions and decimals all can equal each other, as in the case of 10%, 0.1 and 1/10. Percents can be greater than 100% or smaller than 1%. A markup from the cost of making an item to the actual sales price is usually greater than 100%. A salesperson's commission might be 1/2% depending on the item sold. Read more...iWorksheets :4Study Guides :1**Algebraic Equations**What are algebraic equations? Algebraic equations are mathematical quations that contain a letter or variable, which represents a number. When algebraic equations are written in words, the words must be changed into the appropriate numbers and variable in order to solve. Read more...iWorksheets :5Study Guides :1**Equations and inequalities**An equation is mathematical statement that shows that two expressions are equal to each other. The expressions used in an equation can contain variables or numbers. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Inequalities are also solved by using inverse operations. Read more...iWorksheets :3Study Guides :1**Integer operations**Integer operations are the mathematical operations that involve integers. Integers are negative numbers, zero and positive numbers. Adding and subtracting integers are useful in everyday life because there are many situations that involved negative numbers such as calculating sea level or temperatures. Equations with integers are solved using inverse operations. Addition and subtraction are inverse operations, and multiplication and division are inverse operations of each other. Read more...iWorksheets :4Study Guides :1**Rational numbers and operations**A rational number is a number that can be made into a fraction. Decimals that repeat or terminate are rational because they can be changed into fractions. A square root of a number is a number that when multiplied by itself will result in the original number. The square root of 4 is 2 because 2 · 2 = 4. Read more...iWorksheets :3Study Guides :1**Solving linear equations**When graphed, a linear equation is a straight line. Although the standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept, linear equations often have both of the variables on the same side of the equal sign. Linear equations can be solved for one variable when the other variable is given. Read more...iWorksheets :5Study Guides :1**Solving equations and inequalities**Algebraic equations are mathematical equations that contain a letter or variable which represents a number. To solve an algebraic equation, inverse operations are used. Algebraic inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to, ≥; less than, <; and less than or equal to, ≤. When multiplying or dividing by a negative number occurs, the inequality sign is reversed from the original inequality sign in order for the inequality to be correct. Read more...iWorksheets :3Study Guides :1#### 8.F. Functions (F)

##### Define, evaluate, and compare functions

###### 8.F.1. Understand that a function is a rule that assigns to each input exactly one output. The graph of a function is the set of ordered pairs consisting of an input and the corresponding output.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Functions**FreeA function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :5Study Guides :1###### 8.F.3. Interpret the equation y = mx + b as defining a linear function, whose graph is a straight line; give examples of functions that are not linear. For example, the function A = s^2 giving the area of a square as a function of its side length is not linear because its graph contains the points (1,1), (2,4) and (3,9), which are not on a straight line.

**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1##### Use functions to model relationships between quantities

###### 8.F.4. Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x, y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of a linear function in terms of the situation it models, and in terms of its graph or a table of values.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1#### 8.G. Geometry (G)

##### Understand congruence and similarity using physical models, transparencies, or geometry software

###### 8.G.1. Verify experimentally the properties of rotations, reflections, and translations

###### 8.G.1.a. Lines are taken to lines, and line segments to line segments of the same length.

**Geometric Proportions**Geometric proportions compare two similar polygons. Similar polygons have equal corresponding angles and corresponding sides that are in proportion. A proportion equation can be used to prove two figures to be similar. If two figures are similar, the proportion equation can be used to find a missing side of one of the figures. Read more...iWorksheets :4Study Guides :1**Plane Figures: Closed Figure Relationships**Plane figures in regards to closed figure relationships refer to the coordinate plane and congruent figures, circles, circle graphs, transformations and symmetry. Congruent figures have the same size and shape. Transformations are made up of translations, rotations and reflections. A translation of a figure keeps the size and shape of a figure, but moves it to a different location. A rotation turns a figure about a point on the figure. A reflection of a figure produces a mirror image of the figure when it is reflected in a given line. Read more...iWorksheets :3Study Guides :1**Patterns in geometry**Patterns in geometry refer to shapes and their measures. Shapes can be congruent to one another. Shapes can also be manipulated to form similar shapes. The types of transformations are reflection, rotation, dilation and translation. With a reflection, a figure is reflected, or flipped, in a line so that the new figure is a mirror image on the other side of the line. A rotation rotates, or turns, a shape to make a new figure. A dilation shrinks or enlarges a figure. A translation shifts a figure to a new position. Read more...iWorksheets :3Study Guides :1**Ratios, proportions and percents**Numerical proportions compare two numbers. A proportion is usually in the form of a:b or a/b. There are 4 parts to a proportion and it can be solved when 3 of the 4 parts are known. Proportions can be solved using the Cross Product Property, which states that the cross products of a proportion are equal. Read more...iWorksheets :4Study Guides :1**Similarity and scale**Similarity refers to similar figures and the ability to compare them using proportions. Similar figures have equal corresponding angles and corresponding sides that are in proportion. A proportion equation can be used to prove two figures to be similar. If two figures are similar, the proportion equation can be used to find a missing side of one of the figures. Read more...iWorksheets :7Study Guides :1###### 8.G.1.b. Angles are taken to angles of the same measure.

**Geometric Proportions**Geometric proportions compare two similar polygons. Similar polygons have equal corresponding angles and corresponding sides that are in proportion. A proportion equation can be used to prove two figures to be similar. If two figures are similar, the proportion equation can be used to find a missing side of one of the figures. Read more...iWorksheets :4Study Guides :1**Plane Figures: Closed Figure Relationships**Plane figures in regards to closed figure relationships refer to the coordinate plane and congruent figures, circles, circle graphs, transformations and symmetry. Congruent figures have the same size and shape. Transformations are made up of translations, rotations and reflections. A translation of a figure keeps the size and shape of a figure, but moves it to a different location. A rotation turns a figure about a point on the figure. A reflection of a figure produces a mirror image of the figure when it is reflected in a given line. Read more...iWorksheets :3Study Guides :1**Patterns in geometry**Patterns in geometry refer to shapes and their measures. Shapes can be congruent to one another. Shapes can also be manipulated to form similar shapes. The types of transformations are reflection, rotation, dilation and translation. With a reflection, a figure is reflected, or flipped, in a line so that the new figure is a mirror image on the other side of the line. A rotation rotates, or turns, a shape to make a new figure. A dilation shrinks or enlarges a figure. A translation shifts a figure to a new position. Read more...iWorksheets :3Study Guides :1**Ratios, proportions and percents**Numerical proportions compare two numbers. A proportion is usually in the form of a:b or a/b. There are 4 parts to a proportion and it can be solved when 3 of the 4 parts are known. Proportions can be solved using the Cross Product Property, which states that the cross products of a proportion are equal. Read more...iWorksheets :4Study Guides :1**Similarity and scale**Similarity refers to similar figures and the ability to compare them using proportions. Similar figures have equal corresponding angles and corresponding sides that are in proportion. A proportion equation can be used to prove two figures to be similar. If two figures are similar, the proportion equation can be used to find a missing side of one of the figures. Read more...iWorksheets :7Study Guides :1###### 8.G.1.c. Parallel lines are taken to parallel lines.

**Geometric Proportions**Geometric proportions compare two similar polygons. Similar polygons have equal corresponding angles and corresponding sides that are in proportion. A proportion equation can be used to prove two figures to be similar. If two figures are similar, the proportion equation can be used to find a missing side of one of the figures. Read more...iWorksheets :4Study Guides :1**Plane Figures: Closed Figure Relationships**Plane figures in regards to closed figure relationships refer to the coordinate plane and congruent figures, circles, circle graphs, transformations and symmetry. Congruent figures have the same size and shape. Transformations are made up of translations, rotations and reflections. A translation of a figure keeps the size and shape of a figure, but moves it to a different location. A rotation turns a figure about a point on the figure. A reflection of a figure produces a mirror image of the figure when it is reflected in a given line. Read more...iWorksheets :3Study Guides :1**Patterns in geometry**Patterns in geometry refer to shapes and their measures. Shapes can be congruent to one another. Shapes can also be manipulated to form similar shapes. The types of transformations are reflection, rotation, dilation and translation. With a reflection, a figure is reflected, or flipped, in a line so that the new figure is a mirror image on the other side of the line. A rotation rotates, or turns, a shape to make a new figure. A dilation shrinks or enlarges a figure. A translation shifts a figure to a new position. Read more...iWorksheets :3Study Guides :1**Ratios, proportions and percents**Numerical proportions compare two numbers. A proportion is usually in the form of a:b or a/b. There are 4 parts to a proportion and it can be solved when 3 of the 4 parts are known. Proportions can be solved using the Cross Product Property, which states that the cross products of a proportion are equal. Read more...iWorksheets :4Study Guides :1**Similarity and scale**Similarity refers to similar figures and the ability to compare them using proportions. Similar figures have equal corresponding angles and corresponding sides that are in proportion. A proportion equation can be used to prove two figures to be similar. If two figures are similar, the proportion equation can be used to find a missing side of one of the figures. Read more...iWorksheets :7Study Guides :1###### 8.G.2. Understand that a two-dimensional figure is congruent to another if the second can be obtained from the first by a sequence of rotations, reflections, and translations; given two congruent figures, describe a sequence that exhibits the congruence between them.

**Plane Figures: Lines and Angles**Plane figures in regards to lines and angles refer to the coordinate plane and the various lines and angles within the coordinate plane. Lines in a coordinate plane can be parallel or perpendicular. Angles in a coordinate plane can be acute, obtuse, right or straight. Adjacent angles are two angles that have a common vertex and a common side but do not overlap. Read more...iWorksheets :3Study Guides :1**Plane Figures: Closed Figure Relationships**Plane figures in regards to closed figure relationships refer to the coordinate plane and congruent figures, circles, circle graphs, transformations and symmetry. Congruent figures have the same size and shape. Transformations are made up of translations, rotations and reflections. A translation of a figure keeps the size and shape of a figure, but moves it to a different location. A rotation turns a figure about a point on the figure. A reflection of a figure produces a mirror image of the figure when it is reflected in a given line. Read more...iWorksheets :3Study Guides :1**Patterns in geometry**Patterns in geometry refer to shapes and their measures. Shapes can be congruent to one another. Shapes can also be manipulated to form similar shapes. The types of transformations are reflection, rotation, dilation and translation. With a reflection, a figure is reflected, or flipped, in a line so that the new figure is a mirror image on the other side of the line. A rotation rotates, or turns, a shape to make a new figure. A dilation shrinks or enlarges a figure. A translation shifts a figure to a new position. Read more...iWorksheets :3Study Guides :1##### Understand and apply the Pythagorean Theorem

###### 8.G.7. Apply the Pythagorean Theorem to determine unknown side lengths in right triangles in real-world and mathematical problems in two and three dimensions.

**The Pythagorean Theorem**Pythagorean Theorem is a fundamental relation in Euclidean geometry. It states the sum of the squares of the legs of a right triangle equals the square of the length
of the hypotenuse. Determine the distance between two points using the Pythagorean Theorem. Read more...iWorksheets :10Study Guides :2##### Solve real-world and mathematical problems involving volume of cylinders, cones, and spheres

###### 8.G.9. Know the formulas for the volumes of cones, cylinders, and spheres and use them to solve real-world and mathematical problems.

**Finding Volume**Volume measures the amount a solid figure can hold. Volume is measured in terms of cubed units and can be measured in inches, feet, meters, centimeters, and millimeters. The formula for the volume of a rectangular prism is V = l · w · h, where l is the length, w is the width, and h is the height. Read more...iWorksheets :4Study Guides :1**Three dimensional geometry/Measurement**Three-dimensional geometry/measurement refers to three-dimensional (3D) shapes and the measurement of their shapes concerning volume and surface area. The figures of prisms, cylinders, pyramids, cones and spheres are all 3D figures. Volume measures the amount a solid figure can hold. Volume is measured in terms of units³ and can be measured in inches, feet, meters, centimeters, and millimeters. Read more...iWorksheets :11Study Guides :1#### 8.SP. Statistics and Probability (SP)

##### Investigate patterns of association in bivariate data

###### 8.SP.1. Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association.

**Analyzing, Graphing and Displaying Data**There are many types of graphs such as, bar graphs, histograms and line graphs. A bar graph compares data in categories and uses bars, either vertical or horizontal. A histogram is similar to a bar graph, but with histograms the bars touch each other where with bar graphs the bars do not touch each other. A line graph is useful for graphing how data changes over time. With a line graph, data is plotted as points and lines are drawn to connect the points to show how the data changes. Read more...iWorksheets :6Study Guides :1**Using graphs to analyze data**There are different types of graphs and ways that data can be analyzed using the graphs. Graphs are based on the coordinate plane. Data are the points on the plane. If collecting data about the ages of people living on one street, the data is all the ages. The data can then be organized into groups, and evaluated. Mean, mode and median are different ways to evaluate data. Read more...iWorksheets :7Study Guides :1**Collecting and describing data**Collecting and describing data refers to the different ways to gather data and the different ways to arrange data whether it is in a table, graph, or pie chart. Data can be collected by either taking a sample of a population or by conducting a survey. Describing data looks at data after it has been organized and makes conclusions about the data. Read more...iWorksheets :3Study Guides :1**Displaying data**Displaying data refers to the many ways that data can be displayed whether it is on a bar graph, line graph, circle graph, pictograph, line plot, scatter plot or another way. Certain data is better displayed with different graphs as opposed to other graphs. E.g. if data representing the cost of a movie over the past 5 years were to be displayed, a line graph would be best. A circle graph would not be appropriate to use because a circle graph represents data that can add up to one or 100%. Read more...iWorksheets :4Study Guides :1###### 8.SP.2. Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line.

**Linear relationships**Linear relationships refer to two quantities that are related with a linear equation. Since a linear equation is a line, a linear relationship refers to two quantities on a line and their relationship to one another. This relationship can be direct or inverse. If y varies directly as x, it means if y is doubled, then x is doubled. The formula for a direct variation is y = kx, where k is the constant of variation. Read more...iWorksheets :3Study Guides :1### MS.CM8AI. Compacted Mathematics Grade 8 (with Algebra I)

#### CM8AI.A-SSE. Algebra: Seeing Structure in Expressions (A-SSE)

##### Write expressions in equivalent forms to solve problems

###### A-SSE.3. Choose and produce an equivalent form of an expression to reveal and explain properties of the quantity represented by the expression.

###### A-SSE.3.c. Use the properties of exponents to transform expressions for exponential functions. For example the expression 1.15^t can be rewritten as [1.15^(1/12)]^12t ≈ 1.012^12t to reveal the approximate equivalent monthly interest rate if the annual rate is 15%.

**Functions**FreeA function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :5Study Guides :1#### CM8AI.A-APR. Algebra: Arithmetic with Polynomials and Rational Expressions (A-APR)

##### Perform arithmetic operations on polynomials

###### A-APR.1. Understand that polynomials form a system analogous to the integers, namely, they are closed under the operations of addition, subtraction, and multiplication; add, subtract, and multiply polynomials.

**Polynomials and Exponents**FreeA polynomial is an expression which is in the form of ax<sup>n</sup>, where a is any real number and n is a whole number. If a polynomial has only one term, it is called a monomial. If it has two terms, it is a binomial and if it has three terms, it is a trinomial. The standard form of a polynomial is when the powers of the variables are decreasing from left to right. Read more...iWorksheets :6Study Guides :1#### CM8AI.A-CED. Algebra: Creating Equations (A-CED)

##### Create equations that describe numbers or relationships

###### A-CED.1. Create equations and inequalities in one variable and use them to solve problems. Include equations arising from linear and quadratic functions, and simple rational and exponential functions.

**Introduction to Algebra**Algebra is the practice of using expressions with letters or variables that represent numbers. Words can be changed into a mathematical expression by using the words, plus, exceeds, diminished, less, times, the product, divided, the quotient and many more. Algebra uses variables to represent a value that is not yet known. Read more...iWorksheets :4Study Guides :1**Equations and Inequalities**Algebraic equations are mathematical equations that contain a letter or variable, which represents a number. To solve an algebraic equation, inverse operations are used. The inverse operation of addition is subtraction and the inverse operation of subtraction is addition. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Read more...iWorksheets :6Study Guides :1**Algebraic Inequalities**FreeAlgebraic inequalities are mathematical equations that compare two quantities using these criteria: greater than, less than, less than or equal to, greater than or equal to. The only rule of inequalities that must be remembered is that when a variable is multiplied or divided by a negative number the sign is reversed. Read more...iWorksheets :3Study Guides :1**Equations and inequalities**An equation is mathematical statement that shows that two expressions are equal to each other. The expressions used in an equation can contain variables or numbers. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Inequalities are also solved by using inverse operations. Read more...iWorksheets :3Study Guides :1###### A-CED.2. Create equations in two variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [Note this standard appears in future courses with a slight variation in the standard language.]

**Introduction to Algebra**Algebra is the practice of using expressions with letters or variables that represent numbers. Words can be changed into a mathematical expression by using the words, plus, exceeds, diminished, less, times, the product, divided, the quotient and many more. Algebra uses variables to represent a value that is not yet known. Read more...iWorksheets :4Study Guides :1**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Solving linear equations**When graphed, a linear equation is a straight line. Although the standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept, linear equations often have both of the variables on the same side of the equal sign. Linear equations can be solved for one variable when the other variable is given. Read more...iWorksheets :5Study Guides :1**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1###### A-CED.3. Represent constraints by equations or inequalities, and by systems of equations and/or inequalities, and interpret solutions as viable or non-viable options in a modeling context. For example, represent inequalities describing nutritional and cost constraints on combinations of different foods.

**Introduction to Algebra**Algebra is the practice of using expressions with letters or variables that represent numbers. Words can be changed into a mathematical expression by using the words, plus, exceeds, diminished, less, times, the product, divided, the quotient and many more. Algebra uses variables to represent a value that is not yet known. Read more...iWorksheets :4Study Guides :1**Equations and Inequalities**Algebraic equations are mathematical equations that contain a letter or variable, which represents a number. To solve an algebraic equation, inverse operations are used. The inverse operation of addition is subtraction and the inverse operation of subtraction is addition. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Read more...iWorksheets :6Study Guides :1**Algebraic Inequalities**FreeAlgebraic inequalities are mathematical equations that compare two quantities using these criteria: greater than, less than, less than or equal to, greater than or equal to. The only rule of inequalities that must be remembered is that when a variable is multiplied or divided by a negative number the sign is reversed. Read more...iWorksheets :3Study Guides :1**Equations and inequalities**An equation is mathematical statement that shows that two expressions are equal to each other. The expressions used in an equation can contain variables or numbers. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Inequalities are also solved by using inverse operations. Read more...iWorksheets :3Study Guides :1**Solving linear equations**When graphed, a linear equation is a straight line. Although the standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept, linear equations often have both of the variables on the same side of the equal sign. Linear equations can be solved for one variable when the other variable is given. Read more...iWorksheets :5Study Guides :1###### A-CED.4. Rearrange formulas to highlight a quantity of interest, using the same reasoning as in solving equations. For example, rearrange Ohm’s law V = IR to highlight resistance R.

**Solving equations and inequalities**Algebraic equations are mathematical equations that contain a letter or variable which represents a number. To solve an algebraic equation, inverse operations are used. Algebraic inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to, ≥; less than, <; and less than or equal to, ≤. When multiplying or dividing by a negative number occurs, the inequality sign is reversed from the original inequality sign in order for the inequality to be correct. Read more...iWorksheets :3Study Guides :1#### CM8AI.A-REI. Algebra: Reasoning with Equations and Inequalities (A-REI)

##### Understand solving equations as a process of reasoning and explain the reasoning

###### A-REI.1. Explain each step in solving a simple equation as following from the equality of numbers asserted at the previous step, starting from the assumption that the original equation has a solution. Construct a viable argument to justify a solution method.

**Introduction to Algebra**Algebra is the practice of using expressions with letters or variables that represent numbers. Words can be changed into a mathematical expression by using the words, plus, exceeds, diminished, less, times, the product, divided, the quotient and many more. Algebra uses variables to represent a value that is not yet known. Read more...iWorksheets :4Study Guides :1**Equations and Inequalities**Algebraic equations are mathematical equations that contain a letter or variable, which represents a number. To solve an algebraic equation, inverse operations are used. The inverse operation of addition is subtraction and the inverse operation of subtraction is addition. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Read more...iWorksheets :6Study Guides :1**Using Integers**Integers are negative numbers, zero and positive numbers. To compare integers, a number line can be used. On a number line, negative integers are on the left side of zero with the larger a negative number, the farther to the left it is. Positive
integers are on the right side of zero on the number line. If a number is to the left of another number it is said to be less than that number. In the coordinate plane, the x-axis is a horizontal line with negative numbers, zero and positive numbers. Read more...iWorksheets :4Study Guides :1**Decimal Operations**Decimal operations refer to the mathematical operations that can be performed with decimals: addition, subtraction, multiplication and division. The process for adding, subtracting, multiplying and dividing decimals must be followed in order to achieve the correct answer. Read more...iWorksheets :3Study Guides :1**Fraction Operations**Fraction operations are the processes of adding, subtracting, multiplying and dividing fractions and mixed numbers. A mixed number is a fraction with a whole number. Adding fractions is common in many everyday events, such as making a recipe and measuring wood. In order to add and subtract fractions, the fractions must have the same denominator. Read more...iWorksheets :3Study Guides :1**Introduction to Percent**What Is Percent? A percent is a term that describes a decimal in terms of one hundred. Percent means per hundred. Percents, fractions and decimals all can equal each other, as in the case of 10%, 0.1 and 1/10. Percents can be greater than 100% or smaller than 1%. A markup from the cost of making an item to the actual sales price is usually greater than 100%. A salesperson's commission might be 1/2% depending on the item sold. Read more...iWorksheets :4Study Guides :1**Algebraic Equations**What are algebraic equations? Algebraic equations are mathematical quations that contain a letter or variable, which represents a number. When algebraic equations are written in words, the words must be changed into the appropriate numbers and variable in order to solve. Read more...iWorksheets :5Study Guides :1**Equations and inequalities**An equation is mathematical statement that shows that two expressions are equal to each other. The expressions used in an equation can contain variables or numbers. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Inequalities are also solved by using inverse operations. Read more...iWorksheets :3Study Guides :1**Integer operations**Integer operations are the mathematical operations that involve integers. Integers are negative numbers, zero and positive numbers. Adding and subtracting integers are useful in everyday life because there are many situations that involved negative numbers such as calculating sea level or temperatures. Equations with integers are solved using inverse operations. Addition and subtraction are inverse operations, and multiplication and division are inverse operations of each other. Read more...iWorksheets :4Study Guides :1**Rational numbers and operations**A rational number is a number that can be made into a fraction. Decimals that repeat or terminate are rational because they can be changed into fractions. A square root of a number is a number that when multiplied by itself will result in the original number. The square root of 4 is 2 because 2 · 2 = 4. Read more...iWorksheets :3Study Guides :1**Solving linear equations**When graphed, a linear equation is a straight line. Although the standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept, linear equations often have both of the variables on the same side of the equal sign. Linear equations can be solved for one variable when the other variable is given. Read more...iWorksheets :5Study Guides :1**Solving equations and inequalities**Algebraic equations are mathematical equations that contain a letter or variable which represents a number. To solve an algebraic equation, inverse operations are used. Algebraic inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to, ≥; less than, <; and less than or equal to, ≤. When multiplying or dividing by a negative number occurs, the inequality sign is reversed from the original inequality sign in order for the inequality to be correct. Read more...iWorksheets :3Study Guides :1##### Solve equations and inequalities in one variable

###### A-REI.3. Solve linear equations and inequalities in one variable, including equations with coefficients represented by letters.

**Introduction to Algebra**Algebra is the practice of using expressions with letters or variables that represent numbers. Words can be changed into a mathematical expression by using the words, plus, exceeds, diminished, less, times, the product, divided, the quotient and many more. Algebra uses variables to represent a value that is not yet known. Read more...iWorksheets :4Study Guides :1**Equations and Inequalities**Algebraic equations are mathematical equations that contain a letter or variable, which represents a number. To solve an algebraic equation, inverse operations are used. The inverse operation of addition is subtraction and the inverse operation of subtraction is addition. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Read more...iWorksheets :6Study Guides :1**Using Integers**Integers are negative numbers, zero and positive numbers. To compare integers, a number line can be used. On a number line, negative integers are on the left side of zero with the larger a negative number, the farther to the left it is. Positive
integers are on the right side of zero on the number line. If a number is to the left of another number it is said to be less than that number. In the coordinate plane, the x-axis is a horizontal line with negative numbers, zero and positive numbers. Read more...iWorksheets :4Study Guides :1**Decimal Operations**Decimal operations refer to the mathematical operations that can be performed with decimals: addition, subtraction, multiplication and division. The process for adding, subtracting, multiplying and dividing decimals must be followed in order to achieve the correct answer. Read more...iWorksheets :3Study Guides :1**Fraction Operations**Fraction operations are the processes of adding, subtracting, multiplying and dividing fractions and mixed numbers. A mixed number is a fraction with a whole number. Adding fractions is common in many everyday events, such as making a recipe and measuring wood. In order to add and subtract fractions, the fractions must have the same denominator. Read more...iWorksheets :3Study Guides :1**Introduction to Percent**What Is Percent? A percent is a term that describes a decimal in terms of one hundred. Percent means per hundred. Percents, fractions and decimals all can equal each other, as in the case of 10%, 0.1 and 1/10. Percents can be greater than 100% or smaller than 1%. A markup from the cost of making an item to the actual sales price is usually greater than 100%. A salesperson's commission might be 1/2% depending on the item sold. Read more...iWorksheets :4Study Guides :1**Algebraic Equations**What are algebraic equations? Algebraic equations are mathematical quations that contain a letter or variable, which represents a number. When algebraic equations are written in words, the words must be changed into the appropriate numbers and variable in order to solve. Read more...iWorksheets :5Study Guides :1**Algebraic Inequalities**FreeAlgebraic inequalities are mathematical equations that compare two quantities using these criteria: greater than, less than, less than or equal to, greater than or equal to. The only rule of inequalities that must be remembered is that when a variable is multiplied or divided by a negative number the sign is reversed. Read more...iWorksheets :3Study Guides :1**Equations and inequalities**An equation is mathematical statement that shows that two expressions are equal to each other. The expressions used in an equation can contain variables or numbers. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Inequalities are also solved by using inverse operations. Read more...iWorksheets :3Study Guides :1**Integer operations**Integer operations are the mathematical operations that involve integers. Integers are negative numbers, zero and positive numbers. Adding and subtracting integers are useful in everyday life because there are many situations that involved negative numbers such as calculating sea level or temperatures. Equations with integers are solved using inverse operations. Addition and subtraction are inverse operations, and multiplication and division are inverse operations of each other. Read more...iWorksheets :4Study Guides :1**Rational numbers and operations**A rational number is a number that can be made into a fraction. Decimals that repeat or terminate are rational because they can be changed into fractions. A square root of a number is a number that when multiplied by itself will result in the original number. The square root of 4 is 2 because 2 · 2 = 4. Read more...iWorksheets :3Study Guides :1**Solving linear equations**When graphed, a linear equation is a straight line. Although the standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept, linear equations often have both of the variables on the same side of the equal sign. Linear equations can be solved for one variable when the other variable is given. Read more...iWorksheets :5Study Guides :1**Solving equations and inequalities**Algebraic equations are mathematical equations that contain a letter or variable which represents a number. To solve an algebraic equation, inverse operations are used. Algebraic inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to, ≥; less than, <; and less than or equal to, ≤. When multiplying or dividing by a negative number occurs, the inequality sign is reversed from the original inequality sign in order for the inequality to be correct. Read more...iWorksheets :3Study Guides :1##### Represent and solve equations and inequalities graphically

###### A-REI.12. Graph the solutions to a linear inequality in two variables as a half-plane (excluding the boundary in the case of a strict inequality), and graph the solution set to a system of linear inequalities in two variables as the intersection of the corresponding half-planes.

**Linear relationships**Linear relationships refer to two quantities that are related with a linear equation. Since a linear equation is a line, a linear relationship refers to two quantities on a line and their relationship to one another. This relationship can be direct or inverse. If y varies directly as x, it means if y is doubled, then x is doubled. The formula for a direct variation is y = kx, where k is the constant of variation. Read more...iWorksheets :3Study Guides :1#### CM8AI.F. Functions: Functions (F)

##### Define, evaluate, and compare functions

###### 8.F.1. Understand that a function is a rule that assigns to each input exactly one output. The graph of a function is the set of ordered pairs consisting of an input and the corresponding output.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Functions**FreeA function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :5Study Guides :1###### 8.F.3. Interpret the equation y = mx + b as defining a linear function, whose graph is a straight line; give examples of functions that are not linear. For example, the function A = s^2 giving the area of a square as a function of its side length is not linear because its graph contains the points (1,1), (2,4) and (3,9), which are not on a straight line.

**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1##### Use functions to model relationships between quantities

###### 8.F.4. Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x, y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of a linear function in terms of the situation it models, and in terms of its graph or a table of values.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1#### CM8AI.F-IF. Functions: Interpreting Functions (F-IF)

##### Understand the concept of a function and use function notation

###### F-IF.1. Understand that a function from one set (called the domain) to another set (called the range) assigns to each element of the domain exactly one element of the range. If f is a function and x is an element of its domain, then f(x) denotes the output of f corresponding to the input x. The graph of f is the graph of the equation y = f(x).

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Functions**FreeA function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :5Study Guides :1###### F-IF.2. Use function notation, evaluate functions for inputs in their domains, and interpret statements that use function notation in terms of a context.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1###### F-IF.3. Recognize that sequences are functions whose domain is a subset of the integers.

**Sequences**A sequence is an ordered list of numbers. Sequences are the result of a pattern or rule. A pattern or rule can be every other number or some formula such as y = 2x + 3. When a pattern or rule is given, a sequence can be found. When a sequence is given, the pattern or rule can be found. Read more...iWorksheets :5Study Guides :1##### Interpret functions that arise in applications in terms of the context

###### F-IF.4. For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include: intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.

**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1###### F-IF.6. Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Nonlinear Functions and Set Theory**A function can be in the form of y = mx + b. This is an equation of a line, so it is said to be a linear function. Nonlinear functions are functions that are not straight lines. Some examples of nonlinear functions are exponential functions
and parabolic functions. An exponential function, y = aˆx, is a curved line that gets closer to but does not touch the x-axis. A parabolic function, y = ax² + bx +c, is a U-shaped line that can either be facing up or facing down. Read more...iWorksheets :5Study Guides :1**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1##### Analyze functions using different representations

###### F-IF.7. Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.

###### F-IF.7.a. Graph functions (linear and quadratic) and show intercepts, maxima, and minima.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1#### CM8AI.F-BF. Functions: Building Functions (F-BF)

##### Build a function that models a relationship between two quantities

###### F-BF.1. Write a function that describes a relationship between two quantities.

###### F-BF.1.a. Determine an explicit expression or steps for calculation from a context.

**Introduction to Algebra**Algebra is the practice of using expressions with letters or variables that represent numbers. Words can be changed into a mathematical expression by using the words, plus, exceeds, diminished, less, times, the product, divided, the quotient and many more. Algebra uses variables to represent a value that is not yet known. Read more...iWorksheets :4Study Guides :1**Solving linear equations**When graphed, a linear equation is a straight line. Although the standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept, linear equations often have both of the variables on the same side of the equal sign. Linear equations can be solved for one variable when the other variable is given. Read more...iWorksheets :5Study Guides :1#### CM8AI.F-LE. Functions: Linear, Quadratic, and Exponential Models (F-LE)

##### Construct and compare linear, quadratic, and exponential models and solve problems

###### F-LE.1. Distinguish between situations that can be modeled with linear functions and with exponential functions.

###### F-LE.1.a. Prove that linear functions grow by equal differences over equal intervals and that exponential functions grow by equal factors over equal intervals.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1**Functions**FreeA function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :5Study Guides :1##### Interpret expressions for functions in terms of the situation they model

###### F-LE.5. Interpret the parameters in a linear or exponential function in terms of a context.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1#### CM8AI.G. Geometry: Geometry (G)

##### Understand and apply the Pythagorean Theorem

###### 8.G.7. Apply the Pythagorean Theorem to determine unknown side lengths in right triangles in real-world and mathematical problems in two and three dimensions.

**The Pythagorean Theorem**Pythagorean Theorem is a fundamental relation in Euclidean geometry. It states the sum of the squares of the legs of a right triangle equals the square of the length
of the hypotenuse. Determine the distance between two points using the Pythagorean Theorem. Read more...iWorksheets :10Study Guides :2#### CM8AI.SP. Statistics and Probability: Statistics and Probability (SP)

##### Investigate patterns of association in bivariate data

###### 8.SP.1. Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association.

**Analyzing, Graphing and Displaying Data**There are many types of graphs such as, bar graphs, histograms and line graphs. A bar graph compares data in categories and uses bars, either vertical or horizontal. A histogram is similar to a bar graph, but with histograms the bars touch each other where with bar graphs the bars do not touch each other. A line graph is useful for graphing how data changes over time. With a line graph, data is plotted as points and lines are drawn to connect the points to show how the data changes. Read more...iWorksheets :6Study Guides :1**Using graphs to analyze data**There are different types of graphs and ways that data can be analyzed using the graphs. Graphs are based on the coordinate plane. Data are the points on the plane. If collecting data about the ages of people living on one street, the data is all the ages. The data can then be organized into groups, and evaluated. Mean, mode and median are different ways to evaluate data. Read more...iWorksheets :7Study Guides :1**Collecting and describing data**Collecting and describing data refers to the different ways to gather data and the different ways to arrange data whether it is in a table, graph, or pie chart. Data can be collected by either taking a sample of a population or by conducting a survey. Describing data looks at data after it has been organized and makes conclusions about the data. Read more...iWorksheets :3Study Guides :1**Displaying data**Displaying data refers to the many ways that data can be displayed whether it is on a bar graph, line graph, circle graph, pictograph, line plot, scatter plot or another way. Certain data is better displayed with different graphs as opposed to other graphs. E.g. if data representing the cost of a movie over the past 5 years were to be displayed, a line graph would be best. A circle graph would not be appropriate to use because a circle graph represents data that can add up to one or 100%. Read more...iWorksheets :4Study Guides :1###### 8.SP.2. Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line.

**Linear relationships**Linear relationships refer to two quantities that are related with a linear equation. Since a linear equation is a line, a linear relationship refers to two quantities on a line and their relationship to one another. This relationship can be direct or inverse. If y varies directly as x, it means if y is doubled, then x is doubled. The formula for a direct variation is y = kx, where k is the constant of variation. Read more...iWorksheets :3Study Guides :1#### CM8AI.S-ID. Statistics and Probability: Interpreting Categorical and Quantitative Data (S-ID)

##### Summarize, represent, and interpret data on two categorical and quantitative variables

###### S-ID.5. Summarize categorical data for two categories in two-way frequency tables. Interpret relative frequencies in the context of the data (including joint, marginal, and conditional relative frequencies). Recognize possible associations and trends in the data.

**Organizing Data**The data can be organized into groups, and evaluated. Mean, mode, median and range are different ways to evaluate data. The mean is the average of the data. The mode refers to the number that occurs the most often in the data. The median is the middle number when the data is arranged in order from lowest to highest. The range is the difference in numbers when the lowest number is subtracted from the highest number. Data can be organized into a table, such as a frequency table. Read more...iWorksheets :3Study Guides :1**Analyzing, Graphing and Displaying Data**There are many types of graphs such as, bar graphs, histograms and line graphs. A bar graph compares data in categories and uses bars, either vertical or horizontal. A histogram is similar to a bar graph, but with histograms the bars touch each other where with bar graphs the bars do not touch each other. A line graph is useful for graphing how data changes over time. With a line graph, data is plotted as points and lines are drawn to connect the points to show how the data changes. Read more...iWorksheets :6Study Guides :1**Using graphs to analyze data**There are different types of graphs and ways that data can be analyzed using the graphs. Graphs are based on the coordinate plane. Data are the points on the plane. If collecting data about the ages of people living on one street, the data is all the ages. The data can then be organized into groups, and evaluated. Mean, mode and median are different ways to evaluate data. Read more...iWorksheets :7Study Guides :1###### S-ID.6. Represent data on two quantitative variables on a scatter plot, and describe how the variables are related.

###### S-ID.6.c. Fit a linear function for a scatter plot that suggests a linear association.

**Linear relationships**Linear relationships refer to two quantities that are related with a linear equation. Since a linear equation is a line, a linear relationship refers to two quantities on a line and their relationship to one another. This relationship can be direct or inverse. If y varies directly as x, it means if y is doubled, then x is doubled. The formula for a direct variation is y = kx, where k is the constant of variation. Read more...iWorksheets :3Study Guides :1### MS.CM8IM. Compacted Mathematics Grade 8 (with Integrated Math I)

#### CM8IM.A-SSE. Algebra: Seeing Structure in Expressions (A-SSE)

##### Write expressions in equivalent forms to solve problems

###### A-SSE.3. Choose and produce an equivalent form of an expression to reveal and explain properties of the quantity represented by the expression.

###### A-SSE.3.c. Use the properties of exponents to transform expressions for exponential functions. For example the expression 1.15^t can be rewritten as [1.15^(1/12)]^12t ≈ 1.012^12t to reveal the approximate equivalent monthly interest rate if the annual rate is 15%.

**Functions**FreeA function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :5Study Guides :1#### CM8IM.A.CED. Algebra: Creating Equations (A-CED)

##### Create equations that describe numbers or relationships

###### A-CED.1. Create equations and inequalities in one variable and use them to solve problems. Include equations arising from linear and quadratic functions, and simple rational and exponential functions.

**Introduction to Algebra**Algebra is the practice of using expressions with letters or variables that represent numbers. Words can be changed into a mathematical expression by using the words, plus, exceeds, diminished, less, times, the product, divided, the quotient and many more. Algebra uses variables to represent a value that is not yet known. Read more...iWorksheets :4Study Guides :1**Equations and Inequalities**Algebraic equations are mathematical equations that contain a letter or variable, which represents a number. To solve an algebraic equation, inverse operations are used. The inverse operation of addition is subtraction and the inverse operation of subtraction is addition. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Read more...iWorksheets :6Study Guides :1**Algebraic Inequalities**FreeAlgebraic inequalities are mathematical equations that compare two quantities using these criteria: greater than, less than, less than or equal to, greater than or equal to. The only rule of inequalities that must be remembered is that when a variable is multiplied or divided by a negative number the sign is reversed. Read more...iWorksheets :3Study Guides :1**Equations and inequalities**An equation is mathematical statement that shows that two expressions are equal to each other. The expressions used in an equation can contain variables or numbers. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Inequalities are also solved by using inverse operations. Read more...iWorksheets :3Study Guides :1###### A-CED.2. Create equations in two variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales. [Note this standard appears in future courses with a slight variation in the standard language.]

**Introduction to Algebra**Algebra is the practice of using expressions with letters or variables that represent numbers. Words can be changed into a mathematical expression by using the words, plus, exceeds, diminished, less, times, the product, divided, the quotient and many more. Algebra uses variables to represent a value that is not yet known. Read more...iWorksheets :4Study Guides :1**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Solving linear equations**When graphed, a linear equation is a straight line. Although the standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept, linear equations often have both of the variables on the same side of the equal sign. Linear equations can be solved for one variable when the other variable is given. Read more...iWorksheets :5Study Guides :1**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1###### A-CED.3. Represent constraints by equations or inequalities, and by systems of equations and/or inequalities, and interpret solutions as viable or non-viable options in a modeling context. For example, represent inequalities describing nutritional and cost constraints on combinations of different foods.

**Introduction to Algebra**Algebra is the practice of using expressions with letters or variables that represent numbers. Words can be changed into a mathematical expression by using the words, plus, exceeds, diminished, less, times, the product, divided, the quotient and many more. Algebra uses variables to represent a value that is not yet known. Read more...iWorksheets :4Study Guides :1**Equations and Inequalities**Algebraic equations are mathematical equations that contain a letter or variable, which represents a number. To solve an algebraic equation, inverse operations are used. The inverse operation of addition is subtraction and the inverse operation of subtraction is addition. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Read more...iWorksheets :6Study Guides :1**Algebraic Inequalities**FreeAlgebraic inequalities are mathematical equations that compare two quantities using these criteria: greater than, less than, less than or equal to, greater than or equal to. The only rule of inequalities that must be remembered is that when a variable is multiplied or divided by a negative number the sign is reversed. Read more...iWorksheets :3Study Guides :1**Equations and inequalities**An equation is mathematical statement that shows that two expressions are equal to each other. The expressions used in an equation can contain variables or numbers. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Inequalities are also solved by using inverse operations. Read more...iWorksheets :3Study Guides :1**Solving linear equations**When graphed, a linear equation is a straight line. Although the standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept, linear equations often have both of the variables on the same side of the equal sign. Linear equations can be solved for one variable when the other variable is given. Read more...iWorksheets :5Study Guides :1###### A-CED.4. Rearrange formulas to highlight a quantity of interest, using the same reasoning as in solving equations. For example, rearrange Ohm’s law V = IR to highlight resistance R.

**Solving equations and inequalities**Algebraic equations are mathematical equations that contain a letter or variable which represents a number. To solve an algebraic equation, inverse operations are used. Algebraic inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to, ≥; less than, <; and less than or equal to, ≤. When multiplying or dividing by a negative number occurs, the inequality sign is reversed from the original inequality sign in order for the inequality to be correct. Read more...iWorksheets :3Study Guides :1#### CM8IM.A-REI. Algebra: Reasoning with Equations and Inequalities (A-REI)

##### Solve equations and inequalities in one variable

###### A-REI.3. Solve linear equations and inequalities in one variable, including equations with coefficients represented by letters.

**Introduction to Algebra**Algebra is the practice of using expressions with letters or variables that represent numbers. Words can be changed into a mathematical expression by using the words, plus, exceeds, diminished, less, times, the product, divided, the quotient and many more. Algebra uses variables to represent a value that is not yet known. Read more...iWorksheets :4Study Guides :1**Equations and Inequalities**Algebraic equations are mathematical equations that contain a letter or variable, which represents a number. To solve an algebraic equation, inverse operations are used. The inverse operation of addition is subtraction and the inverse operation of subtraction is addition. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Read more...iWorksheets :6Study Guides :1**Using Integers**Integers are negative numbers, zero and positive numbers. To compare integers, a number line can be used. On a number line, negative integers are on the left side of zero with the larger a negative number, the farther to the left it is. Positive
integers are on the right side of zero on the number line. If a number is to the left of another number it is said to be less than that number. In the coordinate plane, the x-axis is a horizontal line with negative numbers, zero and positive numbers. Read more...iWorksheets :4Study Guides :1**Decimal Operations**Decimal operations refer to the mathematical operations that can be performed with decimals: addition, subtraction, multiplication and division. The process for adding, subtracting, multiplying and dividing decimals must be followed in order to achieve the correct answer. Read more...iWorksheets :3Study Guides :1**Fraction Operations**Fraction operations are the processes of adding, subtracting, multiplying and dividing fractions and mixed numbers. A mixed number is a fraction with a whole number. Adding fractions is common in many everyday events, such as making a recipe and measuring wood. In order to add and subtract fractions, the fractions must have the same denominator. Read more...iWorksheets :3Study Guides :1**Introduction to Percent**What Is Percent? A percent is a term that describes a decimal in terms of one hundred. Percent means per hundred. Percents, fractions and decimals all can equal each other, as in the case of 10%, 0.1 and 1/10. Percents can be greater than 100% or smaller than 1%. A markup from the cost of making an item to the actual sales price is usually greater than 100%. A salesperson's commission might be 1/2% depending on the item sold. Read more...iWorksheets :4Study Guides :1**Algebraic Equations**What are algebraic equations? Algebraic equations are mathematical quations that contain a letter or variable, which represents a number. When algebraic equations are written in words, the words must be changed into the appropriate numbers and variable in order to solve. Read more...iWorksheets :5Study Guides :1**Algebraic Inequalities**FreeAlgebraic inequalities are mathematical equations that compare two quantities using these criteria: greater than, less than, less than or equal to, greater than or equal to. The only rule of inequalities that must be remembered is that when a variable is multiplied or divided by a negative number the sign is reversed. Read more...iWorksheets :3Study Guides :1**Equations and inequalities**An equation is mathematical statement that shows that two expressions are equal to each other. The expressions used in an equation can contain variables or numbers. Inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to ≥; less than, <; and less than or equal to, ≤. Inequalities are also solved by using inverse operations. Read more...iWorksheets :3Study Guides :1**Integer operations**Integer operations are the mathematical operations that involve integers. Integers are negative numbers, zero and positive numbers. Adding and subtracting integers are useful in everyday life because there are many situations that involved negative numbers such as calculating sea level or temperatures. Equations with integers are solved using inverse operations. Addition and subtraction are inverse operations, and multiplication and division are inverse operations of each other. Read more...iWorksheets :4Study Guides :1**Rational numbers and operations**A rational number is a number that can be made into a fraction. Decimals that repeat or terminate are rational because they can be changed into fractions. A square root of a number is a number that when multiplied by itself will result in the original number. The square root of 4 is 2 because 2 · 2 = 4. Read more...iWorksheets :3Study Guides :1**Solving linear equations**When graphed, a linear equation is a straight line. Although the standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept, linear equations often have both of the variables on the same side of the equal sign. Linear equations can be solved for one variable when the other variable is given. Read more...iWorksheets :5Study Guides :1**Solving equations and inequalities**Algebraic equations are mathematical equations that contain a letter or variable which represents a number. To solve an algebraic equation, inverse operations are used. Algebraic inequalities are mathematical equations that compare two quantities using greater than, >; greater than or equal to, ≥; less than, <; and less than or equal to, ≤. When multiplying or dividing by a negative number occurs, the inequality sign is reversed from the original inequality sign in order for the inequality to be correct. Read more...iWorksheets :3Study Guides :1##### Represent and solve equations and inequalities graphically

###### A-REI.12. Graph the solutions to a linear inequality in two variables as a half-plane (excluding the boundary in the case of a strict inequality), and graph the solution set to a system of linear inequalities in two variables as the intersection of the corresponding half-planes.

**Linear relationships**Linear relationships refer to two quantities that are related with a linear equation. Since a linear equation is a line, a linear relationship refers to two quantities on a line and their relationship to one another. This relationship can be direct or inverse. If y varies directly as x, it means if y is doubled, then x is doubled. The formula for a direct variation is y = kx, where k is the constant of variation. Read more...iWorksheets :3Study Guides :1#### CM8IM.F. Functions: Functions (F)

##### Define, evaluate, and compare functions

###### 8.F.1. Understand that a function is a rule that assigns to each input exactly one output. The graph of a function is the set of ordered pairs consisting of an input and the corresponding output.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Functions**FreeA function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :5Study Guides :1###### 8.F.3. Interpret the equation y = mx + b as defining a linear function, whose graph is a straight line; give examples of functions that are not linear. For example, the function A = s^2 giving the area of a square as a function of its side length is not linear because its graph contains the points (1,1), (2,4) and (3,9), which are not on a straight line.

**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1##### Use functions to model relationships between quantities

###### 8.F.4. Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x, y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of a linear function in terms of the situation it models, and in terms of its graph or a table of values.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1#### CM8IM.F-IF. Functions: Interpreting Functions (F-IF)

##### Understand the concept of a function and use function notation

###### F-IF.1. Understand that a function from one set (called the domain) to another set (called the range) assigns to each element of the domain exactly one element of the range. If f is a function and x is an element of its domain, then f(x) denotes the output of f corresponding to the input x. The graph of f is the graph of the equation y = f(x).

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Functions**FreeA function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :5Study Guides :1###### F-IF.2. Use function notation, evaluate functions for inputs in their domains, and interpret statements that use function notation in terms of a context.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1###### F-IF.3. Recognize that sequences are functions whose domain is a subset of the integers.

**Sequences**A sequence is an ordered list of numbers. Sequences are the result of a pattern or rule. A pattern or rule can be every other number or some formula such as y = 2x + 3. When a pattern or rule is given, a sequence can be found. When a sequence is given, the pattern or rule can be found. Read more...iWorksheets :5Study Guides :1##### Interpret functions that arise in applications in terms of the context

###### F-IF.4. For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include: intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.

**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1###### F-IF.6. Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Nonlinear Functions and Set Theory**A function can be in the form of y = mx + b. This is an equation of a line, so it is said to be a linear function. Nonlinear functions are functions that are not straight lines. Some examples of nonlinear functions are exponential functions
and parabolic functions. An exponential function, y = aˆx, is a curved line that gets closer to but does not touch the x-axis. A parabolic function, y = ax² + bx +c, is a U-shaped line that can either be facing up or facing down. Read more...iWorksheets :5Study Guides :1**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1##### Analyze functions using different representations

###### F-IF.7. Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.

###### F-IF.7.a. Graph functions (linear and quadratic) and show intercepts, maxima, and minima.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1#### CM8IM.F-BF. Functions: Building Functions (F-BF)

##### Build a function that models a relationship between two quantities

###### F-BF.1. Write a function that describes a relationship between two quantities.

###### F-BF.1.a. Determine an explicit expression or steps for calculation from a context.

**Introduction to Algebra**Algebra is the practice of using expressions with letters or variables that represent numbers. Words can be changed into a mathematical expression by using the words, plus, exceeds, diminished, less, times, the product, divided, the quotient and many more. Algebra uses variables to represent a value that is not yet known. Read more...iWorksheets :4Study Guides :1**Solving linear equations**When graphed, a linear equation is a straight line. Although the standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept, linear equations often have both of the variables on the same side of the equal sign. Linear equations can be solved for one variable when the other variable is given. Read more...iWorksheets :5Study Guides :1#### CM8IM.F-LE. Functions: Linear, Quadratic, and Exponential Models (F-LE)

##### Construct and compare linear, quadratic, and exponential models and solve problems

###### F-LE.1. Distinguish between situations that can be modeled with linear functions and with exponential functions.

###### F-LE.1.a. Prove that linear functions grow by equal differences over equal intervals and that exponential functions grow by equal factors over equal intervals.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1**Linear equations**Linear equations are equations that have two variables and when graphed are a straight line. Linear equation can be graphed based on their slope and y-intercept. The standard equation for a line is y = mx + b, where m is the slope and b is the y-intercept. Slope can be found with the formula m = (y2 - y1)/(x2 - x1), which represents the change in y over the change in x. Read more...iWorksheets :6Study Guides :1**Functions**FreeA function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :5Study Guides :1##### Interpret expressions for functions in terms of the situation they model

###### F-LE.5. Interpret the parameters in a linear or exponential function in terms of a context.

**Introduction to Functions**A function is a rule that is performed on a number, called an input, to produce a result called an output. The rule consists of one or more mathematical operations that are performed on the input. An example of a function is y = 2x + 3, where x is the input and y is the output. The operations of multiplication and addition are performed on the input, x, to produce the output, y. By substituting a number for x, an output can be determined. Read more...iWorksheets :7Study Guides :1#### CM8IM.G. Geometry: Geometry (G)

##### Understand and apply the Pythagorean Theorem

###### 8.G.7. Apply the Pythagorean Theorem to determine unknown side lengths in right triangles in real-world and mathematical problems in two and three dimensions.

**The Pythagorean Theorem**Pythagorean Theorem is a fundamental relation in Euclidean geometry. It states the sum of the squares of the legs of a right triangle equals the square of the length
of the hypotenuse. Determine the distance between two points using the Pythagorean Theorem. Read more...iWorksheets :10Study Guides :2#### CM8IM.G-CO. Geometry: Congruence (G-CO)

##### Experiment with transformations in the plane

###### G-CO.1. Know precise definitions of angle, circle, perpendicular line, parallel line, and line segment, based on the undefined notions of point, line, distance along a line, and distance around a circular arc.

**Geometric Proportions**Geometric proportions compare two similar polygons. Similar polygons have equal corresponding angles and corresponding sides that are in proportion. A proportion equation can be used to prove two figures to be similar. If two figures are similar, the proportion equation can be used to find a missing side of one of the figures. Read more...iWorksheets :4Study Guides :1**Plane Figures: Lines and Angles**Plane figures in regards to lines and angles refer to the coordinate plane and the various lines and angles within the coordinate plane. Lines in a coordinate plane can be parallel or perpendicular. Angles in a coordinate plane can be acute, obtuse, right or straight. Adjacent angles are two angles that have a common vertex and a common side but do not overlap. Read more...iWorksheets :3Study Guides :1**Plane Figures: Closed Figure Relationships**Plane figures in regards to closed figure relationships refer to the coordinate plane and congruent figures, circles, circle graphs, transformations and symmetry. Congruent figures have the same size and shape. Transformations are made up of translations, rotations and reflections. A translation of a figure keeps the size and shape of a figure, but moves it to a different location. A rotation turns a figure about a point on the figure. A reflection of a figure produces a mirror image of the figure when it is reflected in a given line. Read more...iWorksheets :3Study Guides :1**Measurement, Perimeter, and Circumference**There are two systems used to measure objects, the U.S. Customary system and the metric system. The U.S. Customary system measures length in inches, feet, yards and miles. The metric system is a base ten system and measures length in kilometers, meters, and millimeters. Perimeter is the measurement of the distance around a figure. It is measured in units and can be measured by inches, feet, blocks, meters, centimeters or millimeters. To get the perimeter of any figure, simply add up the measures of the sides of the figure. Read more...iWorksheets :3Study Guides :1**Exploring Area and Surface Area**Area is the amount of surface a shape covers. Area is measured in square units, whether the units are inches, feet, meters or centimeters. The area formula for a triangle is: A = 1/2 · b · h, where b is the base and h is the height. The area formula for a circle is: A = π · r², where π is usually 3.14 and r is the radius of the circle. The area formula for a parallelogram is: A = b · h, where b is the
base and h is the height. Read more...iWorksheets :4Study Guides :1**The Pythagorean Theorem**Pythagorean Theorem is a fundamental relation in Euclidean geometry. It states the sum of the squares of the legs of a right triangle equals the square of the length
of the hypotenuse. Determine the distance between two points using the Pythagorean Theorem. Read more...iWorksheets :10Study Guides :2**Finding Volume**Volume measures the amount a solid figure can hold. Volume is measured in terms of cubed units and can be measured in inches, feet, meters, centimeters, and millimeters. The formula for the volume of a rectangular prism is V = l · w · h, where l is the length, w is the width, and h is the height. Read more...iWorksheets :4Study Guides :1**Plane figures**Plane figures refer to points, lines, angles, and planes in the coordinate plane. Lines can be parallel or perpendicular. Angles can be categorized as acute, obtuse or right. Angles can also be complementary or supplementary depending on how many degrees they add up to. Plane figures can also refer to shapes in the coordinate plane. Triangles, quadrilaterals and other polygons can be shown in the coordinate plane. Read more...iWorksheets :4Study Guides :1**Patterns in geometry**Patterns in geometry refer to shapes and their measures. Shapes can be congruent to one another. Shapes can also be manipulated to form similar shapes. The types of transformations are reflection, rotation, dilation and translation. With a reflection, a figure is reflected, or flipped, in a line so that the new figure is a mirror image on the other side of the line. A rotation rotates, or turns, a shape to make a new figure. A dilation shrinks or enlarges a figure. A translation shifts a figure to a new position. Read more...iWorksheets :3Study Guides :1**Perimeter and area**What Is Perimeter and Area? Perimeter is the measurement of the distance around a figure. It is measured in units and can be measured by inches, feet, blocks, meters, centimeters or millimeters. To find the perimeter of any figure, simply add up the measures of the sides of the figure. Area is the amount of surface a shape covers. Area is measured in square units, whether the units are inches, feet, meters or centimeters. The area formula for a parallelogram is: A = b · h, where b is the base and h is the height. Read more...iWorksheets :4Study Guides :1**Three dimensional geometry/Measurement**Three-dimensional geometry/measurement refers to three-dimensional (3D) shapes and the measurement of their shapes concerning volume and surface area. The figures of prisms, cylinders, pyramids, cones and spheres are all 3D figures. Volume measures the amount a solid figure can hold. Volume is measured in terms of units³ and can be measured in inches, feet, meters, centimeters, and millimeters. Read more...iWorksheets :11Study Guides :1**Similarity and scale**Similarity refers to similar figures and the ability to compare them using proportions. Similar figures have equal corresponding angles and corresponding sides that are in proportion. A proportion equation can be used to prove two figures to be similar. If two figures are similar, the proportion equation can be used to find a missing side of one of the figures. Read more...iWorksheets :7Study Guides :1###### G-CO.2. Represent transformations in the plane using, e.g., transparencies and geometry software; describe transformations as functions that take points in the plane as inputs and give other points as outputs. Compare transformations that preserve distance and angle to those that do not (e.g., translation versus horizontal stretch).

**Patterns in geometry**Patterns in geometry refer to shapes and their measures. Shapes can be congruent to one another. Shapes can also be manipulated to form similar shapes. The types of transformations are reflection, rotation, dilation and translation. With a reflection, a figure is reflected, or flipped, in a line so that the new figure is a mirror image on the other side of the line. A rotation rotates, or turns, a shape to make a new figure. A dilation shrinks or enlarges a figure. A translation shifts a figure to a new position. Read more...iWorksheets :3Study Guides :1**Similarity and scale**Similarity refers to similar figures and the ability to compare them using proportions. Similar figures have equal corresponding angles and corresponding sides that are in proportion. A proportion equation can be used to prove two figures to be similar. If two figures are similar, the proportion equation can be used to find a missing side of one of the figures. Read more...iWorksheets :7Study Guides :1###### G-CO.3. Given a rectangle, parallelogram, trapezoid, or regular polygon, describe the rotations and reflections that carry it onto itself.

**Patterns in geometry**Patterns in geometry refer to shapes and their measures. Shapes can be congruent to one another. Shapes can also be manipulated to form similar shapes. The types of transformations are reflection, rotation, dilation and translation. With a reflection, a figure is reflected, or flipped, in a line so that the new figure is a mirror image on the other side of the line. A rotation rotates, or turns, a shape to make a new figure. A dilation shrinks or enlarges a figure. A translation shifts a figure to a new position. Read more...iWorksheets :3Study Guides :1###### G-CO.4. Develop definitions of rotations, reflections, and translations in terms of angles, circles, perpendicular lines, parallel lines, and line segments.

**Patterns in geometry**Patterns in geometry refer to shapes and their measures. Shapes can be congruent to one another. Shapes can also be manipulated to form similar shapes. The types of transformations are reflection, rotation, dilation and translation. With a reflection, a figure is reflected, or flipped, in a line so that the new figure is a mirror image on the other side of the line. A rotation rotates, or turns, a shape to make a new figure. A dilation shrinks or enlarges a figure. A translation shifts a figure to a new position. Read more...iWorksheets :3Study Guides :1###### G-CO.5. Given a geometric figure and a rotation, reflection, or translation, draw the transformed figure using, e.g., graph paper, tracing paper, or geometry software. Specify a sequence of transformations that will carry a given figure onto another.

**Patterns in geometry**Patterns in geometry refer to shapes and their measures. Shapes can be congruent to one another. Shapes can also be manipulated to form similar shapes. The types of transformations are reflection, rotation, dilation and translation. With a reflection, a figure is reflected, or flipped, in a line so that the new figure is a mirror image on the other side of the line. A rotation rotates, or turns, a shape to make a new figure. A dilation shrinks or enlarges a figure. A translation shifts a figure to a new position. Read more...iWorksheets :3Study Guides :1##### Understand congruence in terms of rigid motions

###### G-CO.6. Use geometric descriptions of rigid motions to transform figures and to predict the effect of a given rigid motion on a given figure; given two figures, use the definition of congruence in terms of rigid motions to decide if they are congruent.

**Patterns in geometry**Patterns in geometry refer to shapes and their measures. Shapes can be congruent to one another. Shapes can also be manipulated to form similar shapes. The types of transformations are reflection, rotation, dilation and translation. With a reflection, a figure is reflected, or flipped, in a line so that the new figure is a mirror image on the other side of the line. A rotation rotates, or turns, a shape to make a new figure. A dilation shrinks or enlarges a figure. A translation shifts a figure to a new position. Read more...iWorksheets :3Study Guides :1#### CM8IM.SP. Statistics and Probability: Statistics and Probability (SP)

##### Investigate patterns of association in bivariate data

###### 8.SP.1. Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association.

**Analyzing, Graphing and Displaying Data**There are many types of graphs such as, bar graphs, histograms and line graphs. A bar graph compares data in categories and uses bars, either vertical or horizontal. A histogram is similar to a bar graph, but with histograms the bars touch each other where with bar graphs the bars do not touch each other. A line graph is useful for graphing how data changes over time. With a line graph, data is plotted as points and lines are drawn to connect the points to show how the data changes. Read more...iWorksheets :6Study Guides :1**Using graphs to analyze data**There are different types of graphs and ways that data can be analyzed using the graphs. Graphs are based on the coordinate plane. Data are the points on the plane. If collecting data about the ages of people living on one street, the data is all the ages. The data can then be organized into groups, and evaluated. Mean, mode and median are different ways to evaluate data. Read more...iWorksheets :7Study Guides :1**Collecting and describing data**Collecting and describing data refers to the different ways to gather data and the different ways to arrange data whether it is in a table, graph, or pie chart. Data can be collected by either taking a sample of a population or by conducting a survey. Describing data looks at data after it has been organized and makes conclusions about the data. Read more...iWorksheets :3Study Guides :1**Displaying data**Displaying data refers to the many ways that data can be displayed whether it is on a bar graph, line graph, circle graph, pictograph, line plot, scatter plot or another way. Certain data is better displayed with different graphs as opposed to other graphs. E.g. if data representing the cost of a movie over the past 5 years were to be displayed, a line graph would be best. A circle graph would not be appropriate to use because a circle graph represents data that can add up to one or 100%. Read more...iWorksheets :4Study Guides :1###### 8.SP.2. Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line.

**Linear relationships**Linear relationships refer to two quantities that are related with a linear equation. Since a linear equation is a line, a linear relationship refers to two quantities on a line and their relationship to one another. This relationship can be direct or inverse. If y varies directly as x, it means if y is doubled, then x is doubled. The formula for a direct variation is y = kx, where k is the constant of variation. Read more...iWorksheets :3Study Guides :1#### CM8IM.S-ID. Statistics and Probability: Interpreting Categorical and Quantitative Data (S-ID)

##### Summarize, represent, and interpret data on two categorical and quantitative variables

###### S-ID.5. Summarize categorical data for two categories in two-way frequency tables. Interpret relative frequencies in the context of the data (including joint, marginal, and conditional relative frequencies). Recognize possible associations and trends in the data.

**Organizing Data**The data can be organized into groups, and evaluated. Mean, mode, median and range are different ways to evaluate data. The mean is the average of the data. The mode refers to the number that occurs the most often in the data. The median is the middle number when the data is arranged in order from lowest to highest. The range is the difference in numbers when the lowest number is subtracted from the highest number. Data can be organized into a table, such as a frequency table. Read more...iWorksheets :3Study Guides :1**Analyzing, Graphing and Displaying Data**There are many types of graphs such as, bar graphs, histograms and line graphs. A bar graph compares data in categories and uses bars, either vertical or horizontal. A histogram is similar to a bar graph, but with histograms the bars touch each other where with bar graphs the bars do not touch each other. A line graph is useful for graphing how data changes over time. With a line graph, data is plotted as points and lines are drawn to connect the points to show how the data changes. Read more...iWorksheets :6Study Guides :1**Using graphs to analyze data**There are different types of graphs and ways that data can be analyzed using the graphs. Graphs are based on the coordinate plane. Data are the points on the plane. If collecting data about the ages of people living on one street, the data is all the ages. The data can then be organized into groups, and evaluated. Mean, mode and median are different ways to evaluate data. Read more...iWorksheets :7Study Guides :1###### S-ID.6. Represent data on two quantitative variables on a scatter plot, and describe how the variables are related.

###### S-ID.6.c. Fit a linear function for a scatter plot that suggests a linear association.

**Linear relationships**Linear relationships refer to two quantities that are related with a linear equation. Since a linear equation is a line, a linear relationship refers to two quantities on a line and their relationship to one another. This relationship can be direct or inverse. If y varies directly as x, it means if y is doubled, then x is doubled. The formula for a direct variation is y = kx, where k is the constant of variation. Read more...iWorksheets :3Study Guides :1 Standards

### NewPath Learning resources are fully aligned to US Education Standards. Select a standard below to view correlations to your selected resource: