Freeis one of the four basic operations of arithmetic, with the others being subtraction, multiplication and division. The addition of two whole numbers is the total amount of those quantities combined. Read more...iWorksheets: 3Study Guides: 1Fractions consist of two numbers. The top number is called the numerator.
The bottom number is called the denominator. To add two fractions with the same denominator: Add the numerators and place the sum over the common denominator. Read more...iWorksheets: 3Study Guides: 1A right angle is an angle that measures 90°. A straight angle is an angle that measures 180°. An obtuse angle is an angle that measures more than 90°. An acute angle is an angle that measures less than 90°. Read more...iWorksheets: 10Study Guides: 1Factors are two numbers multiplied together to get a product (an answer to a multiplication problem) Read more...iWorksheets: 3Study Guides: 1Vocabulary Sets: 1Figures are congruent if they are identical in every way except for their
position. Read more...iWorksheets: 3Study Guides: 1Collecting Data. Data = information. You can collect data from other people using polls and surveys. Recording Data. You can record the numerical data you collected on a chart or graph: bar graphs, pictographs, line graphs, pie charts, column charts. Read more...iWorksheets: 4Study Guides: 1Elapsed time is the amount of time that has passed between two defined times. Read more...iWorksheets: 4Study Guides: 1Equivalent fractions are fractions that have EQUAL value. Read more...iWorksheets: 3Study Guides: 1Vocabulary Sets: 1Measurement is the assignment of a number to a characteristic of an object or event, which can be compared with other objects or events. Read more...iWorksheets: 6Study Guides: 1Vocabulary Sets: 2Patterns in shapes and numbers. Read more...iWorksheets: 3Study Guides: 1Positive integers are all the whole numbers greater than zero. Negative integers are all the opposites of these whole numbers, numbers that are less than zero. Zero is considered neither positive nor negative Read more...iWorksheets: 4Study Guides: 1Ratios are used to make a comparison between two things. Read more...iWorksheets: 7Study Guides: 1Vocabulary Sets: 1Simplifying fractions means to make the fraction as simple as possible. Read more...iWorksheets: 3Study Guides: 1Vocabulary Sets: 1The statistical mode is the number that occurs most frequently in a set of
numbers. Read more...iWorksheets: 3Study Guides: 1Fractions consist of two numbers. The top number is called the numerator. The bottom number is called the denominator. First, make sure the denominators are the same, then subtract the numerators. Read more...iWorksheets: 3Study Guides: 1MO.5.NBT. Number Sense and Operations in Base Ten
5.NBT.A. Use place value system understanding to perform operations with multi-digit whole numbers to billions and decimals to thousandths.
5.NBT.A.1. Read, write and identify numbers from billions to thousandths using number names, base ten numerals and expanded form.
When putting decimals in order from least to greatest, we must look at
the highest place value first. Read more...iWorksheets :6Study Guides :1Vocabulary :1A whole number is a number without fractions. Read more...iWorksheets :3Study Guides :1Vocabulary :1The number system we use is based on a place value system. Although
there are only 10 different digits in this system, it is possible to order them in so many variations that the numbers represented are infinite. Read more...iWorksheets :3Study Guides :1READING, WRITING, COMPARING, AND ORDERING DECIMALS Read more...iWorksheets :3Study Guides :1Vocabulary :1What Is Place Value? In our decimal number system, the value of a digit depends on its place, or position, in the number. Beginning with the ones place at the right, each place value is multiplied by increasing powers of 10. Read more...iWorksheets :4Study Guides :1Vocabulary :1When we write numbers, the position of each digit is important. Each position is 10 more than the one before it. So, 23 means “add 2*10 to 3*1″. In the number 467: the "7" is in the Ones position, meaning 7 ones, the "6" is in the Tens position meaning 6 tens, and the "4" is in the Hundreds position. Read more...iWorksheets :3Study Guides :1 5.NBT.A.2. Compare two numbers from billions to thousandths using the symbols >, = or <, and justify the solution.
Any fraction can be changed into a decimal and any decimal can be changed into a fraction. Read more...iWorksheets :3Study Guides :1Exponential notation is shorten way of expressing a large number using exponents. Read more...iWorksheets :6Study Guides :1Vocabulary :1Comparing whole numbers, fractions, and decimals means looking at the values of two numbers and deciding if they are greater than, less than or equal to each other. Read more...iWorksheets :3Study Guides :1When putting decimals in order from least to greatest, we must look at
the highest place value first. Read more...iWorksheets :6Study Guides :1Vocabulary :1Comparing two numbers and deciding which one is greater Read more...iWorksheets :3Study Guides :1How to convert fractions to decimals: Divide the denominator (the bottom part) into the numerator (the top part). Read more...iWorksheets :3Study Guides :1If a number is greater than another number that means it is higher
in value than the other number. If a number is less than another number that means it is lower in value than the other number. Read more...iWorksheets :3Study Guides :1Compare fractions and decimals using <, >, or =. Read more...iWorksheets :3Study Guides :1What is comparing and ordering numbers? Ordering numbers means listing numbers from least to greatest, or greatest to least. Comparing numbers means looking at the values of two numbers and deciding if the numbers are greater than, less than, or equal to each other. Read more...iWorksheets :3Study Guides :1 5.NBT.A.3. Understand that in a multi-digit number, a digit represents 1/10 times what it would represents in the place to its left.
Place value is the numerical value that a digit has by virtue of its position in a number. Read more...iWorksheets :6Study Guides :1Exponential notation is shorten way of expressing a large number using exponents. Read more...iWorksheets :6Study Guides :1Vocabulary :1A whole number is a number without fractions. Read more...iWorksheets :3Study Guides :1Vocabulary :1Comparing two numbers and deciding which one is greater Read more...iWorksheets :3Study Guides :1The number system we use is based on a place value system. Although
there are only 10 different digits in this system, it is possible to order them in so many variations that the numbers represented are infinite. Read more...iWorksheets :3Study Guides :1You add/subtract/multiply/divide decimals the same way you add/subtract/multiply/divide whole numbers BUT you also need to place the decimal in the correct spot. When multiplying decimals, the decimals may or may NOT be lined up in the multiplication problem. Read more...iWorksheets :10Study Guides :1Vocabulary :1What is comparing and ordering numbers? Ordering numbers means listing numbers from least to greatest, or greatest to least. Comparing numbers means looking at the values of two numbers and deciding if the numbers are greater than, less than, or equal to each other. Read more...iWorksheets :3Study Guides :1What Is Rounding? Rounding means reducing the digits in a number while trying to keep its value similar. How to Round: The number in the given place is increased by one if the digit to its right is 5 or greater. The number in the given place remains the same if the digit to its right is less than 5. Read more...iWorksheets :3Study Guides :1Vocabulary :1What Is Place Value? In our decimal number system, the value of a digit depends on its place, or position, in the number. Beginning with the ones place at the right, each place value is multiplied by increasing powers of 10. Read more...iWorksheets :4Study Guides :1Vocabulary :1When we write numbers, the position of each digit is important. Each position is 10 more than the one before it. So, 23 means “add 2*10 to 3*1″. In the number 467: the "7" is in the Ones position, meaning 7 ones, the "6" is in the Tens position meaning 6 tens, and the "4" is in the Hundreds position. Read more...iWorksheets :3Study Guides :1 5.NBT.A.4. Evaluate the value of powers of 10 and understand the relationship to the place value system.
Place value is the numerical value that a digit has by virtue of its position in a number. Read more...iWorksheets :6Study Guides :1Exponential notation is shorten way of expressing a large number using exponents. Read more...iWorksheets :6Study Guides :1Vocabulary :1A whole number is a number without fractions. Read more...iWorksheets :3Study Guides :1Vocabulary :1Comparing two numbers and deciding which one is greater Read more...iWorksheets :3Study Guides :1The number system we use is based on a place value system. Although
there are only 10 different digits in this system, it is possible to order them in so many variations that the numbers represented are infinite. Read more...iWorksheets :3Study Guides :1You add/subtract/multiply/divide decimals the same way you add/subtract/multiply/divide whole numbers BUT you also need to place the decimal in the correct spot. When multiplying decimals, the decimals may or may NOT be lined up in the multiplication problem. Read more...iWorksheets :10Study Guides :1Vocabulary :1What is comparing and ordering numbers? Ordering numbers means listing numbers from least to greatest, or greatest to least. Comparing numbers means looking at the values of two numbers and deciding if the numbers are greater than, less than, or equal to each other. Read more...iWorksheets :3Study Guides :1What Is Rounding? Rounding means reducing the digits in a number while trying to keep its value similar. How to Round: The number in the given place is increased by one if the digit to its right is 5 or greater. The number in the given place remains the same if the digit to its right is less than 5. Read more...iWorksheets :3Study Guides :1Vocabulary :1What Is Place Value? In our decimal number system, the value of a digit depends on its place, or position, in the number. Beginning with the ones place at the right, each place value is multiplied by increasing powers of 10. Read more...iWorksheets :4Study Guides :1Vocabulary :1Understanding of models for multiplication, place value, and properties of operations (in particular, the distributive property). Read more...iWorksheets :6Study Guides :1When we write numbers, the position of each digit is important. Each position is 10 more than the one before it. So, 23 means “add 2*10 to 3*1″. In the number 467: the "7" is in the Ones position, meaning 7 ones, the "6" is in the Tens position meaning 6 tens, and the "4" is in the Hundreds position. Read more...iWorksheets :3Study Guides :1 5.NBT.A.5. Round numbers from billions to thousandths place.
Estimation is an approximate calculation. Read more...iWorksheets :3Study Guides :1Rounding makes numbers that are easier to work with in your head. Rounded numbers are only approximate. Use rounding to get an answer that is close but that does not have to be exact. Read more...iWorksheets :3Study Guides :1To estimate means to make an educated guess based on what you already know. Read more...iWorksheets :3Study Guides :1What Is Rounding? Rounding means reducing the digits in a number while trying to keep its value similar. How to Round: The number in the given place is increased by one if the digit to its right is 5 or greater. The number in the given place remains the same if the digit to its right is less than 5. Read more...iWorksheets :3Study Guides :1Vocabulary :1 5.NBT.A.6. Add and subtract multi-digit whole numbers and decimals to the thousandths place, and justify the solution.
Addition and subtraction of decimals is like adding and subtracting whole numbers. The only thing we must remember is to line up the place values correctly. Read more...iWorksheets :14Study Guides :1Vocabulary :1The distributive property offers a choice in multiplication of two ways to treat the addends in the equation. We are multiplying a sum by a factor which results in the same product as multiplying each addend by the factor and then adding the products. Read more...iWorksheets :3Study Guides :1The
commutative property allows us to change the order of the
numbers
without changing the outcome of the problem. The
associative property
allows us to change the grouping of the
numbers. Read more...iWorksheets :4Study Guides :1Using the Commutative Property in addition means that the order of
addends does not matter; the sum will remain the same. Read more...iWorksheets :3Study Guides :1FreeAdding four digit numbers. Read more...iWorksheets :3Study Guides :1You add/subtract/multiply/divide decimals the same way you add/subtract/multiply/divide whole numbers BUT you also need to place the decimal in the correct spot. When multiplying decimals, the decimals may or may NOT be lined up in the multiplication problem. Read more...iWorksheets :10Study Guides :1Vocabulary :1Addition is combining two or more numbers. The term used for addition is plus. When two or more numbers are combined they form a new number called a sum. Subtraction is “taking away” one number from another. The term is minus. The number left after subtracting is called a difference. Read more...iWorksheets :3Study Guides :1 5.NBT.A.7. Multiply multi-digit whole numbers and decimals to the hundredths place, and justify the solution.
Multiplication is a mathematical operation in which numbers, called factors, are multiplied together to get a result, called a product. Multiplication can be used with numbers or decimals of any size. Read more...iWorksheets :3Study Guides :1Multiplication is one of the four elementary, mathematical operations of arithmetic. Read more...iWorksheets :6Study Guides :1Vocabulary :1The distributive property offers a choice in multiplication of two ways to treat the addends in the equation. We are multiplying a sum by a factor which results in the same product as multiplying each addend by the factor and then adding the products. Read more...iWorksheets :3Study Guides :1The
commutative property allows us to change the order of the
numbers
without changing the outcome of the problem. The
associative property
allows us to change the grouping of the
numbers. Read more...iWorksheets :4Study Guides :1A number can be identified as odd or even. Odd numbers can't be divided exactly by 2. Read more...iWorksheets :3Study Guides :1Divide three-digit numbers by one- and two-digit numbers. Read more...iWorksheets :6Study Guides :1Vocabulary :1Using the Commutative Property in addition means that the order of
addends does not matter; the sum will remain the same. Read more...iWorksheets :3Study Guides :1You add/subtract/multiply/divide decimals the same way you add/subtract/multiply/divide whole numbers BUT you also need to place the decimal in the correct spot. When multiplying decimals, the decimals may or may NOT be lined up in the multiplication problem. Read more...iWorksheets :10Study Guides :1Vocabulary :1Multiplication of two digits by two digits. What Is Multiplication? Multiplication is a short way of adding or counting. Multiplication is a faster way of adding. By multiplying numbers together, you are adding a series of one number to itself. Read more...iWorksheets :3Study Guides :1Understanding of models for multiplication, place value, and properties of operations (in particular, the distributive property). Read more...iWorksheets :6Study Guides :1 5.NBT.A.8. Divide multi-digit whole numbers and decimals to the hundredths place using up to two-digit divisors and four-digit dividends, and justify the solution.
Division is a mathematical operation is which a number, called a dividend
is divided by another number, called a divisor to get a result, called a
quotient. Read more...iWorksheets :3Study Guides :1Divide three-digit numbers by one- and two-digit numbers. Read more...iWorksheets :6Study Guides :1Vocabulary :1You add/subtract/multiply/divide decimals the same way you add/subtract/multiply/divide whole numbers BUT you also need to place the decimal in the correct spot. When multiplying decimals, the decimals may or may NOT be lined up in the multiplication problem. Read more...iWorksheets :10Study Guides :1Vocabulary :1 MO.5.NF. Number Sense and Operations in Fractions
5.NF.A. Understand the relationship between fractions and decimals (denominators that are factors of 100).
5.NF.A.1. Understand that parts of a whole can be expressed as fractions and/or decimals.
FreeProbability word problems worksheet. Probability is the measure of how likely an event is. Probability = (Total ways a specific outcome will happen) / (Total number of possible outcomes). The probability of event A is the number of ways event A can occur divided by the total number of possible outcomes. Read more...iWorksheets :4Study Guides :1Probability word problems worksheet. Probability is the chance of whether something will happen or not. If two things have an EQUAL chance of happening, they have the
SAME probability. If there are MORE chances of something happening (A) than something else (B), that means there is a HIGHER PROBABILITY of that something (A) happening. Read more...iWorksheets :3Study Guides :1A fraction is a part of a whole of something. Read more...iWorksheets :3Study Guides :1READING, WRITING, COMPARING, AND ORDERING DECIMALS Read more...iWorksheets :3Study Guides :1Vocabulary :1What are multiple representations of rational numbers? A rational number represents a value or a part of a value. Rational numbers can be written as integers, fractions, decimals, and percents.The different representations for any given rational number are all equivalent. Read more...iWorksheets :3Study Guides :1The top number of a fraction is called the numerator. It shows how many pieces of a whole we are talking about. The bottom number is called the denominator. It shows how many pieces an object was divided into, or how many total pieces we have. Read more...iWorksheets :4Study Guides :1 5.NF.A.2. Convert decimals to fractions and fractions to decimals.
A percentage is a number or ratio expressed as a fraction of 100. Read more...iWorksheets :6Study Guides :1Vocabulary :1The term percent refers to a fraction in which the denominator is 100.
It is a way to compare a number with 100. Read more...iWorksheets :6Study Guides :1Express decimals as an equivalent form of fractions to tenths and hundredths. Read more...iWorksheets :4Study Guides :1Vocabulary :1What are multiple representations of rational numbers? A rational number represents a value or a part of a value. Rational numbers can be written as integers, fractions, decimals, and percents.The different representations for any given rational number are all equivalent. Read more...iWorksheets :3Study Guides :1 5.NF.A.3. Compare and order fractions and/or decimals to the thousandths place using the symbols >, = or <, and justify the solution.
Any fraction can be changed into a decimal and any decimal can be changed into a fraction. Read more...iWorksheets :3Study Guides :1Comparing whole numbers, fractions, and decimals means looking at the values of two numbers and deciding if they are greater than, less than or equal to each other. Read more...iWorksheets :3Study Guides :1When putting decimals in order from least to greatest, we must look at
the highest place value first. Read more...iWorksheets :6Study Guides :1Vocabulary :1When comparing two fractions that have a common denominator, you can looks at the numerators to decide which fraction is greater Read more...iWorksheets :3Study Guides :1Vocabulary :1The order of rational numbers depends on their relationship to each other and to zero. Rational numbers can be dispersed along a number line in both directions from zero. Read more...iWorksheets :6Study Guides :1A fraction consists of two numbers separated by a line - numerator and denominator. To order fractions with like numerators, look at the denominators and compare them two at a time. The fraction with the smaller denominator is the larger fraction. Read more...iWorksheets :3Study Guides :1How to convert fractions to decimals: Divide the denominator (the bottom part) into the numerator (the top part). Read more...iWorksheets :3Study Guides :1Compare fractions and decimals using <, >, or =. Read more...iWorksheets :3Study Guides :1The top number of a fraction is called the numerator. It shows how many pieces of a whole we are talking about. The bottom number is called the denominator. It shows how many pieces an object was divided into, or how many total pieces we have. Read more...iWorksheets :4Study Guides :1 5.NF.B. Perform operations and solve problems with fractions and decimals.
5.NF.B.4. Estimate results of sums, differences and products with fractions and decimals to the thousandths.
Estimation is the process of rounding a number either up or down to the nearest place value requested. Estimation makes it easier to perform mathematical operations quickly. Read more...iWorksheets :6Study Guides :1 5.NF.B.5. Justify the reasonableness of a product when multiplying with fractions.
5.NF.B.5a. Estimate the size of the product based on the size of the two factors.
Estimation is the process of rounding a number either up or down to the nearest place value requested. Estimation makes it easier to perform mathematical operations quickly. Read more...iWorksheets :6Study Guides :1 5.NF.B.7. Extend the concept of multiplication to multiply a fraction or whole number by a fraction.
5.NF.B.7a. Recognize the relationship between multiplying fractions and finding the areas of rectangles with fractional side lengths.
To multiply two fractions with unlike denominators, multiply the numerators and multiply the denominators. It is unnecessary to change the denominators for this operation. Read more...iWorksheets :4Study Guides :1Multiplying fractions is the operation of multiplying two or more fractions together to find a product. Read more...iWorksheets :3Study Guides :1 5.NF.B.7c. Calculate and interpret the product of two fractions less than one.
To multiply two fractions with unlike denominators, multiply the numerators and multiply the denominators. It is unnecessary to change the denominators for this operation. Read more...iWorksheets :4Study Guides :1Multiplying fractions is the operation of multiplying two or more fractions together to find a product. Read more...iWorksheets :3Study Guides :1 MO.5.RA. Relationships and Algebraic Thinking
5.RA.B. Write and interpret numerical expressions.
5.RA.B.3. Write, evaluate and interpret numeric expressions using the order of operations.
A numerical expression is a phrase which represents a number. Read more...iWorksheets :7Study Guides :1Rules of Order of Operations: 1st: Compute all operations inside of parentheses. 2nd: Compute all work with exponents. 3rd: Compute all multiplication and division from left to right. 4th: Compute all addition and subtraction from left to right. Read more...iWorksheets :3Study Guides :1 5.RA.B.4. Translate written expressions into algebraic expressions.
Simple algebra is the term used when using expressions with letters or variables that represent numbers. Read more...iWorksheets :3Study Guides :1 5.RA.C. Use the four operations to represent and solve problems.
5.RA.C.5. Solve and justify multi-step problems involving variables, whole numbers, fractions and decimals.
Algebra is the study of mathematical symbols and the rules for manipulating these symbols Read more...iWorksheets :4Study Guides :1Vocabulary :1An algebraic equation is an expression in which a letter represents an
unknown number Read more...iWorksheets :3Study Guides :1FreeWhat are algebraic equations? Algebraic equations are mathematical quations that contain a letter or variable, which represents a number. Read more...iWorksheets :6Study Guides :1 MO.5.GM. Geometry and Measurement
5.GM.A. Classify two- and three-dimensional geometric shapes.
5.GM.A.1. Understand that attributes belonging to a category of figures also belong to all subcategories.
A perimeter is the measurement of the distance around a figure. It is measured in units and can be measured by inches, feet, blocks, meters, centimeters or millimeters. Read more...iWorksheets :3Study Guides :1A polygon is any 2-dimensional shape formed with straight lines. The perimeter of a polygon is the sum of all its length. Read more...iWorksheets :6Study Guides :1FreeA shape is the external contour or outline of someone of something Read more...iWorksheets :6Study Guides :1Vocabulary :3A polygon is a plane figure with at least three straight sides and angles, and typically five or more. Read more...iWorksheets :7Study Guides :1Vocabulary :1Area is the number of square units needed to cover a flat surface. Read more...iWorksheets :3Study Guides :1 5.GM.A.2. Classify figures in a hierarchy based on properties.
A perimeter is the measurement of the distance around a figure. It is measured in units and can be measured by inches, feet, blocks, meters, centimeters or millimeters. Read more...iWorksheets :3Study Guides :1A polygon is any 2-dimensional shape formed with straight lines. The perimeter of a polygon is the sum of all its length. Read more...iWorksheets :6Study Guides :1FreeA shape is the external contour or outline of someone of something Read more...iWorksheets :6Study Guides :1Vocabulary :3A polygon is a plane figure with at least three straight sides and angles, and typically five or more. Read more...iWorksheets :7Study Guides :1Vocabulary :1Area is the number of square units needed to cover a flat surface. Read more...iWorksheets :3Study Guides :1 5.GM.B. Understand and compute volume.
5.GM.B.4. Understand the concept of volume and recognize that volume is measured in cubic units.
5.GM.B.4a. Describe a cube with edge length 1 unit as a “unit cube” and is said to have “one cubic unit” of volume and can be used to measure volume.
Volume measures the amount a solid figure can hold. Read more...iWorksheets :3Study Guides :1What is volume? Volume is the 3-dimensional size of an object, such as a box. What is capacity? Capacity is the amount a 3-dimensional object can hold or carry. It can also be thought of the measure of volume of a 3-dimensional object. Read more...iWorksheets :4Study Guides :1 5.GM.B.4b. Understand that the volume of a right rectangular prism can be found by stacking multiple layers of the base.
Volume measures the amount a solid figure can hold. Read more...iWorksheets :3Study Guides :1What is volume? Volume is the 3-dimensional size of an object, such as a box. What is capacity? Capacity is the amount a 3-dimensional object can hold or carry. It can also be thought of the measure of volume of a 3-dimensional object. Read more...iWorksheets :4Study Guides :1 5.GM.B.5. Apply the formulas V = l × w × h and V = B × h for volume of right rectangular prisms with whole-number edge lengths.
Volume measures the amount a solid figure can hold. Read more...iWorksheets :3Study Guides :1 5.GM.C. Graph points on the Cartesian coordinate plane within the first quadrant to solve problems.
5.GM.C.6. Define a first quadrant Cartesian coordinate system.
5.GM.C.6a. Represent the axes as scaled perpendicular number lines that both intersect at 0, the origin.
You use plot points to place a point on a coordinate plane by using X and Y coordinates to draw on a coordinate grid. Read more...iWorksheets :3Study Guides :1Vocabulary :1The use of coordinates pertains to graphing and the quadrants that are formed by the x and y-axis. Read more...iWorksheets :3Study Guides :1In a coordinate pair, the first number indicates the position of the
point along the horizontal axis of the grid. The second number
indicates the position of the point along the vertical axis. Read more...iWorksheets :4Study Guides :1Vocabulary :1You can use a pair of numbers to describe the location of a
point on a grid. The numbers in the pair are called coordinates. Read more...iWorksheets :3Study Guides :1Calculate the area of basic polygons drawn on a coordinate plane. Coordinate plane is a grid on which points can be plotted. The horizontal axis is labeled with positive numbers to the right of the vertical axis and negative numbers to the left of the vertical axis. Read more...iWorksheets :3Study Guides :1 5.GM.C.6b. Identify any point on the Cartesian coordinate plane by its ordered pair coordinates.
You use plot points to place a point on a coordinate plane by using X and Y coordinates to draw on a coordinate grid. Read more...iWorksheets :3Study Guides :1Vocabulary :1The use of coordinates pertains to graphing and the quadrants that are formed by the x and y-axis. Read more...iWorksheets :3Study Guides :1In a coordinate pair, the first number indicates the position of the
point along the horizontal axis of the grid. The second number
indicates the position of the point along the vertical axis. Read more...iWorksheets :4Study Guides :1Vocabulary :1You can use a pair of numbers to describe the location of a
point on a grid. The numbers in the pair are called coordinates. Read more...iWorksheets :3Study Guides :1Using tables and graphs is a way people can interpret data. Data means information. So interpreting data just means working out what information is telling you. Information is sometimes shown in tables, charts and graphs to make the information easier to read. Read more...iWorksheets :3Study Guides :1Calculate the area of basic polygons drawn on a coordinate plane. Coordinate plane is a grid on which points can be plotted. The horizontal axis is labeled with positive numbers to the right of the vertical axis and negative numbers to the left of the vertical axis. Read more...iWorksheets :3Study Guides :1 5.GM.C.6c. Define the first number in an ordered pair as the horizontal distance from the origin.
You use plot points to place a point on a coordinate plane by using X and Y coordinates to draw on a coordinate grid. Read more...iWorksheets :3Study Guides :1Vocabulary :1The use of coordinates pertains to graphing and the quadrants that are formed by the x and y-axis. Read more...iWorksheets :3Study Guides :1In a coordinate pair, the first number indicates the position of the
point along the horizontal axis of the grid. The second number
indicates the position of the point along the vertical axis. Read more...iWorksheets :4Study Guides :1Vocabulary :1You can use a pair of numbers to describe the location of a
point on a grid. The numbers in the pair are called coordinates. Read more...iWorksheets :3Study Guides :1Using tables and graphs is a way people can interpret data. Data means information. So interpreting data just means working out what information is telling you. Information is sometimes shown in tables, charts and graphs to make the information easier to read. Read more...iWorksheets :3Study Guides :1Calculate the area of basic polygons drawn on a coordinate plane. Coordinate plane is a grid on which points can be plotted. The horizontal axis is labeled with positive numbers to the right of the vertical axis and negative numbers to the left of the vertical axis. Read more...iWorksheets :3Study Guides :1 5.GM.C.6d. Define the second number in an ordered pair as the vertical distance from the origin.
You use plot points to place a point on a coordinate plane by using X and Y coordinates to draw on a coordinate grid. Read more...iWorksheets :3Study Guides :1Vocabulary :1The use of coordinates pertains to graphing and the quadrants that are formed by the x and y-axis. Read more...iWorksheets :3Study Guides :1In a coordinate pair, the first number indicates the position of the
point along the horizontal axis of the grid. The second number
indicates the position of the point along the vertical axis. Read more...iWorksheets :4Study Guides :1Vocabulary :1You can use a pair of numbers to describe the location of a
point on a grid. The numbers in the pair are called coordinates. Read more...iWorksheets :3Study Guides :1Using tables and graphs is a way people can interpret data. Data means information. So interpreting data just means working out what information is telling you. Information is sometimes shown in tables, charts and graphs to make the information easier to read. Read more...iWorksheets :3Study Guides :1Calculate the area of basic polygons drawn on a coordinate plane. Coordinate plane is a grid on which points can be plotted. The horizontal axis is labeled with positive numbers to the right of the vertical axis and negative numbers to the left of the vertical axis. Read more...iWorksheets :3Study Guides :1 5.GM.C.7. Plot and interpret points in the first quadrant of the Cartesian coordinate plane.
You use plot points to place a point on a coordinate plane by using X and Y coordinates to draw on a coordinate grid. Read more...iWorksheets :3Study Guides :1Vocabulary :1The use of coordinates pertains to graphing and the quadrants that are formed by the x and y-axis. Read more...iWorksheets :3Study Guides :1In a coordinate pair, the first number indicates the position of the
point along the horizontal axis of the grid. The second number
indicates the position of the point along the vertical axis. Read more...iWorksheets :4Study Guides :1Vocabulary :1You can use a pair of numbers to describe the location of a
point on a grid. The numbers in the pair are called coordinates. Read more...iWorksheets :3Study Guides :1Calculate the area of basic polygons drawn on a coordinate plane. Coordinate plane is a grid on which points can be plotted. The horizontal axis is labeled with positive numbers to the right of the vertical axis and negative numbers to the left of the vertical axis. Read more...iWorksheets :3Study Guides :1 5.GM.D. Solve problems involving measurement and conversions within a measurement system.
5.GM.D.8. Convert measurements of capacity, length and weight within a given measurement system.
FreeThere are many units of measurement: inches, feet, yards, miles,
millimeters, meters, seconds, minutes, hours, cups, pints, quarts,
gallons, ounces, pounds, etc Read more...iWorksheets :6Study Guides :1 5.GM.D.9. Solve multi-step problems that require measurement conversions.
FreeThere are many units of measurement: inches, feet, yards, miles,
millimeters, meters, seconds, minutes, hours, cups, pints, quarts,
gallons, ounces, pounds, etc Read more...iWorksheets :6Study Guides :1 MO.5.DS. Data and Statistics
5.DS.A. Represent and analyze data.
5.DS.A.1. Create a line graph to represent a data set, and analyze the data to answer questions and solve problems.
Tables refer to the different types of diagram used to display data.
There are many types of tables such as data table, frequency table, line chart and stern-and-leaf plot. Read more...iWorksheets :3Study Guides :1A graph is a diagram that shows information in an organized way. Read more...iWorksheets :6Study Guides :1Using tables and graphs is a way people can interpret data. Data means information. So interpreting data just means working out what information is telling you. Information is sometimes shown in tables, charts and graphs to make the information easier to read. Read more...iWorksheets :3Study Guides :1What Are Bar, Circle, and Line Graphs? Bar Graphs are used to compare data. A bar graph is used to show relationships between groups. Circle Graphs are also known as Pie graphs or charts. They consist of a circle divided into parts. Line Graphs show gradual changes in data. Read more...iWorksheets :6Study Guides :1 Standards
NewPath Learning resources are fully aligned to US Education Standards. Select a standard below to view correlations to your selected resource: